Chemical characterization of BiFeO3 obtained by Pechini method
نویسندگان
چکیده
منابع مشابه
Synthesis and Characterization of Tin(IV) Oxide Obtained by Chemical Vapor Deposition Method
The effect of precursors on the characteristics of tin oxide obtained by chemical vapor deposition (CVD) method was investigated. The synthesis of nanosized tin(IV) oxide was carried out with the use of two different precursors: tin(II) oxalate obtained using tin chloride(II) and oxalic acid; tin(II) oxalate obtained using tin chloride(II); and ammonium oxalate. The synthesized tin(IV) oxide sa...
متن کاملCharacterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method
high purity fluorapatite (FA) with rod-like and spherical-like morphology was synthesized via sol-gel method. Chemical characterization of FA powders was done by XRD and FTIR analyses. Crystallite samples were calculated using Scherer method. Morphology of FA powders was investigated with TEM and SEM images. The results revealed that increasing the time of hydrolysis of phosphate sols significa...
متن کاملCHARACTERIZATION OF HIGH-SILICA MORDENITE OBTAINED BY DIRECT SYNTHESIS
Three high-silica mordenite zeolites differing in SiO440, ratio were prepared by direct synthesis without using any template. The products Si02/A120, ratio is influenced by the starting gel composition. This ratio is increased upon ion-exchange with NH,Cl and subsequent calcination to prepare protonic mordenite. The protonic mordenites with Si02/A1203ra tios of 14.6,29.2 and 34.6 were chara...
متن کاملSynthesis, structural and morphological characterization of CeO2 – ZnO nanosized powder systems from Pechini ́s method
This work reports on the investigation of nanosized CeO2-ZnO systems prepared by Pechini ́s method. The structural and morphological characterization of CeO2-ZnO systems as well as the characterization of CeO2 and ZnO separately, showed that the employed method result in powders with spheroidal particles whose size are in the range 30 200 nm, which is appropriate to provide homogeneous suspensio...
متن کاملchemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Brazilian Chemical Society
سال: 2008
ISSN: 0103-5053
DOI: 10.1590/s0103-50532008000600015