Chemical Characterisation of the Fracture Surfaces of Polyester Resin and a Polyester-Based Nanocomposite
نویسندگان
چکیده
منابع مشابه
Chemical characterisation of the fracture surfaces of polyester resin and a polyester based nanocomposite
A novel in situ fracture stage has been used to conduct micro compact tension (micro-CT) tests within the preparation chamber of a time-of-flight secondary-ion mass spectrometry (ToF-SIMS) instrument. Tests have been undertaken in the usual ultra high vacuum (UHV) conditions and in an ambient air atmosphere for comparison. A plain polyester resin system has been compared to an organically modif...
متن کاملEco-Friendly Prepared Chemical Toner with Mixed Polyester Resin
Mixed polyester resins are fascinating materials in toner development because of the possibility to tune the toner properties by the simple mixing of different resin components. But the miscibility of two different components with quite different properties is still a challenge in both pulverized and chemical toners. For chemical toners, one alternative is to use organic media to dissolve both ...
متن کاملResin Tearing: a Polyester Gelcoat Surface Defect
Polyester gelcoat has been a useful and popular coating for RP fabrication for over twenty years. The gelcoat has not only been important as a protective coating for the fiberglass laminate in a large variety of construction applications, but in many cases has provided a cosmetically desirable finish that enhances the attractiveness and market value of the RP part. In recent years as the manufa...
متن کاملMechanical Properties of Unsaturated Polyester Resin
Mechanical behaviour of unsaturated polyester resin used for the composite materials has been studied to determine various important parameters, such as tensile and compressive, single edge-notch tensile fracture toughness, flexural properties and fracture energy. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester resin lie between the typical values for epoxy resins ...
متن کاملPolyester Nanocomposite fibers with Antibacterial Properties
Antibacterial nanocomposite polyester (PET) fibres were melt spun by adding nano ZnO loaded Linear Low Density Polyethylene (LLDPE) master batch (MB) to the PET chips. The influence of content of nano ZnO on the antibacterial properties, crystallization behaviour and mechanical properties was studied. It was found that PET composite fibres having 1 % nano ZnO showed the optimum antibacterial ac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Adhesion Science and Technology
سال: 2009
ISSN: 0169-4243,1568-5616
DOI: 10.1163/156856108x379173