Chemical and electrochemical conditions within stress corrosion and corrosion fatigue cracks
نویسندگان
چکیده
منابع مشابه
Stress Corrosion and Static Fatigue of Glass
to be published in Zeitschrift fuer Anorganische und Allgemeine Chemie. (b) Vladimir Balek, “Rare-Gas Diffusion, Reactivity and Electrical Conductivity of Solid ZnO”; to be published in Physica Status Solidi. l2 J. Beretka and M. J. Ridge, “Formation of Zinc Ferrite at Low Temperatures,” Nature (London), 216 [5114] 473-74 (1967). l3 Vladimir Balek. “Emanation Method for Estimating Reactivity of...
متن کاملThe Growth of Small Corrosion Fatigue Cracks in Alloy
The corrosion fatigue crack growth characteristics of small (>35pm) surface and corner cracks in aluminum alloy 7075 is established. The early stage of crack growth is studied by performing in situ long focal length microscope (500X) crack length measurements in laboratory air and 1% NaCl environments. To quantify the “small crack effect” in the corrosive environment, the corrosion fatigue crac...
متن کاملFracture Mechanics and Corrosion Fatigue
The development and current state-of-the-art in fracture mechanics in relation to studies of environment-enhanced fatigue-crack growth (corrosion fatigue) and fatigue-crack growth per se are reviewed. Patterns of response of materials to different loading and environmental conditions are considered in terms of the probable mechanisms for environmental embrittlement. The usefulness of the fractu...
متن کاملAn Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade
First row rotating blades of four axial-flow compressors were prematurely fractured. Previous investigations showed that the site atmosphere contains corrosive compounds which lead to an increase in possibility of pitting on the blades. It was also revealed that the crack was originated from two corrosion pits. Thus, this work is conducted to ascertain which of fatigue or stress corrosion crack...
متن کاملTarnish Resistance, Corrosion and Stress Corrosion Cracking of Gold Alloys
Tarnishing, corrosion and stress corrosion cracking (SeC) of gold alloys are related phenomena. They present problems when they occur in gold jewellery, dental gold alloys and electronic devices. They are exploited, however, in the depletion gilding and finishing of gold jewellery; and in the extraction, refining and fire assaying of gold. There is still much that is not known about these pheno...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: npj Materials Degradation
سال: 2017
ISSN: 2397-2106
DOI: 10.1038/s41529-017-0015-0