Chatter vibration in cylindrical traverse grinding.
نویسندگان
چکیده
منابع مشابه
Study of Traverse Grinding Process (1st Report) Accumulation Phenomenon and Size Generation Mechanism in Traverse Grinding
plicated processes on the wheel surf ace along the wheel width. In order to make these processes clear, the experimental analysis of traverse grinding was conducted by widely changing the speed ratio, Kv, the setting depth of wheel, ‡TMT, and the number of total steps, m, (the ratio of the wheel width over the traverse feed per one revolution of the workpiece). The following results were obtain...
متن کاملEffect of vitrified bond microstructure and volume fraction in the grinding wheel on traverse internal cylindrical grinding of Inconel alloy 600
The following article examines the influence of glass-crystalline bond in grinding wheels with grains made from microcrystalline aluminum oxide, and specifically its effect upon the values of selected operational indicators in the process of traverse internal cylindrical grinding of surfaces made from Inconel® alloy 600. The experimental test results obtained showed that changes in the bond pha...
متن کاملRealisation of grinding-hardening in workpieces of curved surfaces—Part 1 Plunge cylindrical grinding
This paper investigates the feasibility to achieve grinding-hardening in a plunge cylindrical grinding process. To understand the mechanisms, a temperature-dependent finite element heat transfer model incorporating a triangular moving heat source was developed to describe the temperature field, thus to predict the thickness of the grinding-hardened layer. The analysis carried out included the v...
متن کاملVariability in hand-arm vibration during grinding operations.
BACKGROUND Measurements of exposure to vibrations from hand-held tools are often conducted on a single occasion. However, repeated measurements may be crucial for estimating the actual dose with good precision. In addition, knowledge of determinants of exposure could be used to improve working conditions. The aim of this study was to assess hand-arm vibration (HAV) exposure during different gri...
متن کاملInternal Traverse Grinding – From Single Grain Models to Macroscopic Process Simulations
We present recent advances in the modelling and simulation of Internal Traverse Grinding with electroplated cBN wheels, a novel manufacturing process that is capable of performing a high rate of material removal while maintaining a good surface quality of the finished cylindrical part. The major drawback of this process is a highly concentrated thermal load on the workpiece which can result in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1988
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.54.112