منابع مشابه
Analysis of Unsteady Airfoils at Low Speeds
In this study exemplary results on the influence of two fundamental unsteady parameters, the reduced frequency k and the non-dimensional pitching rate α+, on the transition from a steady to an unsteady flow field around the reference airfoil BAC3-11/RES/30/21 are presented using experimental and numerical techniques. The tools used are described and their results verified with each other. On th...
متن کاملChatter Stability Boundary Analysis Using Neural Network
INSTRUCTION A more important focus on chatter is the stability boundary analysis that is more practical and realistic in the sense that this analysis shows the chatter boundary region in all available cutting condition and the chatter state for the machinist in field to get the insight easily to avoid the chatter problem. Considering this points, a new method to get the chatter stability bounda...
متن کاملProcess Damping Analytical Stability Analysis and Validation
INTRODUCTION The analytical stability lobe diagram offers a predictive capability for selecting stable chip width-spindle speed combinations in machining operations [1-4]. However, the increase in allowable chip width provided at spindle speeds near integer fractions of the system’s dominant natural frequency is diminished substantially at low spindle speeds where the stability lobes are closel...
متن کاملAn Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part 2: Application
Chatter stability in milling can be improved significantly using variable pitch cutters. The pitch angles can be optimized for certain chatter frequency and spindle speed ranges using the analytical method presented in the first part of this two-part paper. In this part, the improvement of productivity and surface finish are demonstrated in three example applications. It is shown that chatter s...
متن کاملCreating a Stability Lobe Diagram
Machine tool chatter causes machining instability, surface roughness, and tool wear in metal cutting processes. A stability lobe diagram based on regenerative chatter theory is an effective tool to predict and control chatter. Stability diagrams can be applied in machining processes to optimize the maximum depth of cut at the highest available spindle speed, thus improving the material removal ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1971
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.37.593