Characterizing Passively Q-switched Fiber Laser in LiDAR Application
نویسندگان
چکیده
A LiDAR system consists of a Q-switched fiber laser that emits light pulses to measure the distance from target. We have experimentally demonstrated passively erbium-doped (EDFL) by employing graphene saturable absorber (SA). The SA was prepared dipping polyvinyl alcohol (PVA) thin film into solution. Once fabricated, it can be placed in cavity perform and is operating at 1558.92 nm. shortest pulse received 3.9 μs generated repetition rate 115 kHz. are stable between pump powers 59.6mW 127.1 mW. At maximum power value of127.1 mW, thelaser produced with 1.4mW output 1.1nJ energy.
منابع مشابه
Phase locking of nanosecond pulses in a passively Q-switched two-element fiber laser array
Phase locking of Brillouin backscattering Q-switched laser pulses that are much shorter than the round-trip time of the resonators has been demonstrated in a two-element fiber laser array. Despite the stochastic dynamics of nonlinear pulse generation, simultaneous generation and phase locking of short pulses have been achieved by using diffractive coupling and spatial filtering in an external r...
متن کاملPVP-Assisted Solvothermal Synthesis of High-Yielded Bi2Te3 Hexagonal Nanoplates: Application in Passively Q-Switched Fiber Laser
High-yielded Bi2Te3 hexagonal nanoplates were fabricated via a facile solvothermal method with the assistance of poly (vinyl pyrrolidone) (PVP). Effects of PVP molecular weight and concentration on the morphology and size distribution of the products were illustrated in this study. Molecular weight of PVP is significant for determining the morphology of Bi2Te3. The hexagonal nanoplates with hig...
متن کاملHigh power passively Q-switched ytterbium fiber laser with Cr(4+):YAG as a saturable absorber.
We report an efficient high-peak-power and high-average-power passively Q-switched ytterbium fiber laser with a Cr(4+):YAG crystal as a saturable absorber in an external-resonator configuration. At an incident pump power of 17.5 W, the passively Q-switched fiber laser produces an average power greater than 6.2 W with a pulse repetition rate of 48 kHz. The output pulses noticeably display a mode...
متن کاملHigh-power passively Q-switched thulium fiber laser with distributed stimulated Brillouin scattering.
We report a novel passively Q-switched 2 μm Tm(3+) fiber laser simply by distributed stimulated Brillouin scattering with an all-fiber configuration. The maximum output power is 2.49 W with an optical-to-optical slope efficiency of 12%, and the laser wavelength is centered at ~1991 nm with a spectral width of >10 nm. The single pulse energy can be over 50 μJ with a pulse width of about 20 ns, a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Integrated Engineering
سال: 2023
ISSN: ['2229-838X', '2600-7916']
DOI: https://doi.org/10.30880/ijie.2023.15.03.017