Characterizing Mineral Ellipsoids in New Bone Formation at the Interface of Ti6Al4V Porous Implants (Adv. Mater. Interfaces 24/2023)
نویسندگان
چکیده
Polar 2D Polymer Crystals In article 2300333, Kathryn Grandfield and co-workers show osteocytes, the bone cells responsible for signaling growth maintenance, together with their cell processes (canaliculi) connecting in vicinity of a porous titanium dental implant interface. Captured by focused ion beam 3D imaging, are segmented analyzed to determine orientation respect newly forming bone.
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Bone density study of the proximal femur after hip arthroplasty with porous-coated implants
Progressive loss of bone mineral density around the femora! component of total hip replacement continues to pose a threat to long term prosthetic survival. A linear study was undertaken to measure bone mineral density on a monthly basis following total hip arthroplasty in 11 male patients. The opposite femur was used as the control measurement. Bone mineral density was unchanged at two mo...
متن کاملAppositional bone formation in marginal defects at implants.
In a previous experiment, it was demonstrated that a wide marginal defect around an implant can heal with a high degree of osseointegration. The present experiment was performed to evaluate the degree and quality of de novo bone formation and osseointegration in marginal defects adjacent to submerged titanium implants. All mandibular premolars and 1st molars were extracted in four Labrador dogs...
متن کاملNovel Bio-functional Magnesium Coating on Porous Ti6Al4V Orthopaedic Implants: In vitro and In vivo Study
Titanium and its alloys with various porous structures are one of the most important metals used in orthopaedic implants due to favourable properties as replacement for hard tissues. However, surface modification is critical to improve the osteointegration of titanium and its alloys. In this study, a bioactive magnesium coating was successfully fabricated on porous Ti6Al4V by means of arc ion p...
متن کاملPorous Gelcast Ceramics for Bone Repair Implants
Lightweight, porous ceramic structures are being developed for a variety of biologically-related applications. In bioengineering, there is interest in replacing metal-based implants with more functional implants consisting of porous bioceramics that are bioresorbable. In the design of bioinspired ceramic structures, there is a desire to understand the coupling between geometric complexity and p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Interfaces
سال: 2023
ISSN: ['2196-7350']
DOI: https://doi.org/10.1002/admi.202370072