Characterization of YSZ?YST composites for SOFC anodes
نویسندگان
چکیده
منابع مشابه
Characterization of YSZ-YST Composites for SOFC Anodes
Porous composites of Sr0.88Y0.08TiO3-δ (YST) and yttria-stabilized zirconia (YSZ) were formed by tapecasting methods and examined as potential anodes for SOFC. Even after calcination to 1773 K, the YSZ and YST crystallites remain as separate phases, as demonstrated by XRD and SEM with EDX analysis. Furthermore, it was possible to fabricate anode-supported electrolytes by calcination of a bilaye...
متن کاملSOFC Anodes Based on LST–YSZ Composites and on Y0.04Ce0.48ZrM0.48O2
The properties of solid oxide fuel cell (SOFC) anode functional layers prepared by impregnation of 1 wt % Pd and 10 wt % ceria into porous scaffolds of either Y0.04Ce0.48Zr0.48O2 (CZY) or composites of La0.3Sr0.7TiO3 (LST) and yttria-stabilized zirconia (YSZ) were examined to determine whether these scaffold materials would have sufficient electronic and ionic conductivity. Laminated tapes were...
متن کاملSOFC Anodes Based on Infiltration of La0.3Sr0.7TiO3
Composites formed by infiltration of 45 wt % La0.3Sr0.7TiO3 (LST) into 65% porous yttria-stabilized zirconia (YSZ) were examined for application as solid oxide fuel cell (SOFC) anodes. Although LST does not react with YSZ, the structure of the LST deposits was strongly affected by the calcination temperature. At 1373 K, the LST formed loosely packed, 0.1 μm particles that filled the YSZ pores. ...
متن کاملPreparation of SOFC Anodes by Electrodeposition
Anodes for solid oxide fuel cells (SOFCs) have been prepared by electrodeposition of either Co or Ni into a layer of porous yttria-stabilized zirconia (YSZ), 60 μm thick. The YSZ, having 65% porosity, was prepared by tape casting with graphite pore formers and was attached to the dense YSZ electrolyte. After adding 10 vol % CeO2 by impregnation of aqueous solutions of CeNO3)3, followed by calci...
متن کاملNovel SOFC anodes for the direct electrochemical oxidation of hydrocarbons
Recent developments in solid-oxide fuel cells (SOFC) that electrochemically oxidize hydrocarbon fuels to produce electrical power without first reforming them to H2 are described. First, the operating principles of SOFCs are reviewed, along with a description of state-of-the-art SOFC designs. This is followed by a discussion of the concepts and procedures used in the synthesis of direct-oxidati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Solid State Ionics
سال: 2004
ISSN: 0167-2738
DOI: 10.1016/j.ssi.2004.09.033