Characterization of Spot Weld Growth on Dissimilar Joints with Different Thicknesses
نویسندگان
چکیده
منابع مشابه
Weld speed effects on quality of Ti/Al dissimilar metal joints using laser beam welding
Laser beam welding produces good quality welds with minimum shrinkage for sheet metal joints. The quality of welded joint depends upon surface morphology, hardness, mixing of liquid phases and metallurgical non-homogeneity induced by gradients of temperatures and cooling rate at the weld interface. In the present investigation, Titanium Grade5 (Ti) and AA2024 (Al) alloy dissimilar sheet metals ...
متن کاملStudies on Distortion of Dissimilar Thin Sheet Weld Joints Using Laser Beam Welding
To achieve reliable welds with minimum distortion for the fabrication of components in aerospace industry laser beam welding is attempted. Laser welding can provide a significant benefit for the welding of Titanium and Aluminium thin sheet alloys of its precision and rapid processing capability. For laser welding, pulse shape, energy, duration, repetition rate and peak power are the most import...
متن کاملCreep behavior and in-depth microstructural characterization of dissimilar joints
The 700 °C power plants currently under development will utilize Ni-base alloys such as alloy 617 for components to be operated at temperatures >650 °C. Due to economic reasons for components or parts of components which are subjected to temperatures <650 °C, 2% Cr or 9-12% Cr steels is used, depending on the required mechanical properties. This makes the dissimilar joining of Ni-base alloys an...
متن کاملSpot Weld Analysis With 2D Ultrasonic Arrays
This paper describes a threefold method of testing the performance of an array-based ultrasonic tool for nondestructive testing of spot welds. The tool is described in its capabilities, use, and advantages over existing counterparts. Performance testing for and the results from carrying out the testing are described. The three performance testing methods include 1) the use of calibrated samples...
متن کاملAnalysis of Spot Weld Joints by Ultrasonic Inspection, Fem and Residual Stress Measurements
The present work seeks to determine the parameters for approval, through ultrasonic techniques, of spot welded joints of low carbon steel sheets. For such experience the mechanical behavior of a spotwelded joint was characterized under fatigue, in load cycles ranging from zero to 14 kN, on sheets of 1.5 mm thickness, joined by three spot welds of 7.5 mm of medium diameter, being the distance am...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES
سال: 2012
ISSN: 2289-4659,2231-8380
DOI: 10.15282/jmes.2.2012.4.0015