Characterization of Silicon Carbide Reinforced Aluminum Matrix Composites

Experimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles

In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...

Fabrication of Aluminum Matrix Composite Reinforced by Silicon Carbide of Various Micro-structures

Characterization Of Particulate-Reinforced Aluminium 6061 / Boron Carbide Composites

Aluminum-based metal matrix composite (MMC) materials are used in the design of ground transportation vehicles and aircraft. Compared with conventional, unreinforced alloys, composite materials usually exhibit higher strength, both at ambient and elevated temperatures, as well as good fatigue strength and wear resistance. MMCs could be produced by variety of methods such as Stir cast, Liquid In...

Fabrication of in situ TiC reinforced aluminum matrix composites

In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...

Fabrication of in situ TiC reinforced aluminum matrix composites Part I: Microstructural characterization

In the present work traditional ingot metallurgy plus rapid solidification techniques were used to in situ produce Al-TiC composites with refined microstructures and enhanced dispersion hardening of the reinforcing phases. Microstructural characterization of the experimental materials were comprehensively done by optical, electron microscopy and X-ray diffraction. The results show that the in s...