Characterization of polyurethane foam conditioned sand
نویسندگان
چکیده
منابع مشابه
Characterization of Hot Bituminous-Asphalt Mixtures with Recycled Polyurethane Foam
Received: June 06, 2017 Revised: July 05, 2017 Accepted: July 19, 2017 Abstract: Introduction: The use of polymer wastes in pavement as road is an increasing trend in the road construction sector. Those new pavements reduce the amount of solid waste disposed into landfills and provide more sustainable construction due to the use of in-situ materials. Polyurethane foam waste is a thermostable po...
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملSynthesis and Characterization of Polyols from Refined Cooking Oil for Polyurethane Foam Formation Synthesis and Characterization of Polyols from Refined Cooking Oil for Polyurethane Foam Formation
Chemical Engineering, School of Engineering and Information Technology, Universiti Malaysia Sabah, UMS Road, 88400 Kota Kinabalu, Sabah, Malaysia *School of Chemical Sciences, Universiti Sains Malaysia, 11800 Penang, Malaysia **School of Dental Sciences, Health Campus, Universiti Sains Malaysia, 16150 Kubang Kerian, Kelantan, Malaysia ***Malaysian Institute Pharmaceutical & Nutraceutical, MOSTI...
متن کاملNonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملWaste Minimization Strategy: Flexible Polyurethane Foam Manufacture
Methylene chloride and CFCs are used as auxiliary blowing agents in the manufacture of flexible polyurethanefoams and are promptly emitted during the manufacturing processes.The concentrationof the auxiliary blowing agent are quite low due to the accepted practice of using large volumes of air to lower the ambient concentration of toxic isocyanates (a key chemical in the urethane reaction seque...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Engineering Trends (Print)
سال: 2023
ISSN: ['2682-2091', '2812-5487']
DOI: https://doi.org/10.21608/jaet.2022.116631.1138