Characterization of High Temperature Solar Thermal Selective Absorber Coatings at Operation Temperature
نویسندگان
چکیده
منابع مشابه
Platinum-Based High Temperature Selective Absorber Coatings
In photothermal energy conversion the absorbed solar flux is converted to heat which is then used directly or is converted to mechanical or electrical energy. Efficient receiver design requires that thermal losses from the absorber surface, which is the hottest element of the system, be minimised. Receivers are, in fact, generally classified according to their operating temperature ( I , 2). Th...
متن کاملHighly Efficient Selective Metamaterial Absorber for High-Temperature Solar Thermal Energy Harvesting
In this work, a selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the fabricated solar absorber is characterized to be higher than 0.9 in the UV, visible and, near infrared (IR) regime, while the mid-IR emittance is around 0.2. The high broadband ab...
متن کاملOptimization of high temperature SiC volumetric solar absorber
Focusing on radiative properties (absorption and scattering coefficient, scattering phase-function) of silicon carbide foams, several predictive models are compared to spectral transmittance and reflectance measurements (bi-directional and directionalhemispherical) in the aim of determining new correlations based on ceramic foam characteristics (struts/pores size and porosity). A mono-dimension...
متن کاملRPC operation at high temperature
The resistive electrodes of RPCs utilised in several current experiments (ATLAS, CMS, ALICE, BABAR and ARGO) are made of phenolic/melaminic polymers, with room temperature resistivities ranging from 10 O cm; for high rate operation in avalanche mode, to 5 10 O cm; for streamer mode operation at low rate. The resistivity has however a strong temperature dependence, decreasing exponentially with ...
متن کاملSuperlattice photonic crystal as broadband solar absorber for high temperature operation.
A high performance solar absorber using a 2D tantalum superlattice photonic crystal (PhC) is proposed and its design is optimized for high-temperature energy conversion. In contrast to the simple lattice PhC, which is limited by diffraction in the short wavelength range, the superlattice PhC achieves solar absorption over broadband spectral range due to the contribution from two superposed latt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2014
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2014.03.219