Characterization Of High Porosity White Fired Ceramic Clay
نویسندگان
چکیده
منابع مشابه
Structure–property relationship in high-tension ceramic insulator fired at high temperature
Ceramic insulators are widely used in microelectronic devices. In this paper, the mechanical and electrical properties of porcelain ceramic insulator fired at 1350 ◦C have been investigated along with microstructural characterization using scanning electron microscopy (SEM) in order to understand the structure–property relationship of ceramic insulator. The bending and the dielectric strength w...
متن کاملMicrofabrication of a Novel Ceramic Pressure Sensor with High Sensitivity Based on Low-Temperature Co-Fired Ceramic (LTCC) Technology
In this paper, a novel capacitance pressure sensor based on Low-Temperature Co-Fired Ceramic (LTCC) technology is proposed for pressure measurement. This approach differs from the traditional fabrication process for a LTCC pressure sensor because a 4J33 iron-nickel-cobalt alloy is applied to avoid the collapse of the cavity and to improve the performance of the sensor. Unlike the traditional LT...
متن کاملHigh porosity polyethylene aerogels
Monolithic aerogels of high molecular weight polyethylene (Mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. These low density and highly porous aerogels present an apparent porosity up to 90%. The aerogel morphology observed by scanning electron microscopy (SEM) is characterized by spherulitic stru...
متن کاملPorous Ceramic Filters through 3d Printing
This paper describes current and on-going work in adapting Z-Corp 3D printers to operate with low-cost ceramic materials. The components produced with these clay-based ceramic powders can be fired to produce strong, complex and lightweight ceramic parts. The final material properties, including the porosity of the parts, can be controlled through the part design and, potentially, through additi...
متن کاملMoisture expansion and mass gain in fired clay ceramics
We report the first measurements of mass gain and expansive strain in clay ceramics immediately following firing. The results show that both mass gain and expansive strain follow a well defined two-stage process, each stage of which is linear with (time)1/4, with a transition from the first to the second stage commencing at t ∼ 1.5 h. The first stage mass gain and strain rates are ∼3.5 times gr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Afyon Kocatepe University Journal of Sciences and Engineering
سال: 2015
ISSN: 2147-5296,2149-3367
DOI: 10.5578/fmbd.10439