Characterization of Fiber Reinforced Plastics Made from Aramid and Phenol Resin or Furan Resin.
نویسندگان
چکیده
منابع مشابه
Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers.
STATEMENT OF PROBLEM Despite the favorable properties of conventional PMMA used as a denture base material, its fracture resistance could be improved. PURPOSE This in vitro study was performed to determine whether the flexural strength of a commercially available, heat-polymerized acrylic denture base material could be improved through reinforcement with 3 types of fibers. MATERIAL AND METH...
متن کاملFabrication of Glass Fiber Reinforced Composites Based on Bio-Oil Phenol Formaldehyde Resin
In this study, bio-oil from fast pyrolysis of renewable biomass was added by the mass of phenol to synthesize bio-oil phenol formaldehyde (BPF) resins, which were used to fabricate glass fiber (GF) reinforced BPF resin (GF/BPF) composites. The properties of the BPF resin and the GF/BPF composites prepared were tested. The functional groups and thermal property of BPF resin were thoroughly inves...
متن کاملBonded Orthodontic Retainer and Fixed Partial Denture Made with Fiber Reinforced Composite Resin
Retention is the phase of orthodontic treatment which maintains teeth in their orthodontically corrected positions, following the cessation of active orthodontic tooth movement. Development of resin-impregnated, fiber-reinforced composite materials has provided the potential to develop new approaches for stabilizing teeth and replacing teeth conservatively. This case report describes the rehabi...
متن کاملUsage of Fiber-Reinforced Resin Instruments in Interproximal Surfaces
OBJECTIVES The aim of this study was to investigate the effects of fiber-reinforced resin burs on the surface roughness of a nanofilled composite. METHODS Average surface roughness values (Ra, mum) were measured using a surface profilometer and surface textures after finishing procedures were evaluated using a scanning electron microscope (SEM). Thirty cylindrical specimens were prepared usin...
متن کاملCreep of experimental short fiber-reinforced composite resin.
The purpose of this study was to investigate the reinforcing effect of short E-glass fiber fillers oriented in different directions on composite resin under static and dynamic loading. Experimental short fiber-reinforced composite resin (FC) was prepared by mixing 22.5 wt% of short E-glass fibers, 22.5 wt% of resin, and 55 wt% of silane-treated silica fillers. Three groups of specimens (n=5) we...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 2002
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.59.51