Characterization of Feal by Powder Metallurgy Route
نویسندگان
چکیده
منابع مشابه
Fracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route
The main aim of this research was to find the mechanism for the failure of the CoCrMo porous nano-composite by characterizing microstructural changes and fractured surface after compression test. For this purpose, porous nano-composites were prepared with the addition of bioactive glass nano-powder to Co-base alloy with 22.5% porosity by the combination of space-holder and powder metallurgy tec...
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملToz Metalurji̇si̇ Yöntemi̇ İle Alümi̇nyum Köpük Üreti̇mi̇ Procuction of Al Foams by Powder Metallurgy Route
In this study pure Al and pre-alloyed Al alloy powders (Alumix 231Al-Cu %2.5-Mg %0.5–Si %14) with or without reinforcing elements were used to produce classical Al foam or spherical Al foam with various production parameters by using powder metallurgy route and the results obtained have been discussed. Al2O3 and SiC particles were used as reinforcing elements and TiH2 powders were used as foami...
متن کاملSynthesis and characterisation of hot extruded aluminium-based MMC developed by powder metallurgy route
Background: Improvement of the mechanical and tribological properties due to extrusion can be attributed to the improved density and excellent bond strength due to high compressive stress. Methods: To avoid the product defects mathematically contoured cosine profiled die was used for the thermomechanical treatment. Improvement of mechanical characterization like density, hardness, compression t...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Material Science & Engineering
سال: 2016
ISSN: 2169-0022
DOI: 10.4172/2169-0022.1000267