Characterization of debonding between two different materials with beam like geometries
نویسندگان
چکیده
Abstract Expressions for the energy release rate and compliance are defined some asymmetric beam like specimens. The expressions derived taking into account Timoshenko theory with elastic foundation. is expressed by applied loads or a combination of rotation angles, latter allows to characterize bonded interfaces without foundation properties. condition stability under displacement controlled test analysed typical results presented useful characterization fracture toughness bimaterial interfaces.
منابع مشابه
Beam-ion confinement for different injection geometries
The DIII-D tokamak is equipped with neutral beam sources that inject in four different directions; in addition, the plasma can be moved up or down to compare off-axis with on-axis injection. Fast-ion data for eight different conditions have been obtained: co/counter, near-tangential/near-perpendicular and on-axis/off-axis. Neutron measurements during short beam pulses assess prompt and delayed ...
متن کاملRecording different geometries of 2D hexagonal photonic crystals by choosing the phase between two-beam interference exposures.
2D hexagonal patterns can be generated by the superimposition of two or three fringe patterns that have been formed by two-wave interference and that have rotations of 60 degrees between them. Superimposing three exposures solves the problem of asymmetry in the cross section of structures, which is caused by double exposure. The resulting structure, however, depends on the phase shift of the th...
متن کاملInterfacial Debonding Behavior of Composite Beam/plates with Pzt Patch
Wang Liang, Bai Rui-xiang*, Yan Cheng State Key Laboratory of Structural Analysis for Industrial Equipment Dalian University of Technology, Dalian 116024, P.R. China * Corresponding author: [email protected] Abstract: This paper studies interfacial debonding behavior of composite beams bonded with piezoelectric material. The focus is put on crack initiation and growth of the piezoelectric adhes...
متن کاملa cross-comparative dtudy between two textbook series in terms of the presentation of politeness
چکیده ندارد.
15 صفحه اولDebonding characteristics of a polymer mesh base ceramic bracket bonded with two different conditioning methods.
The aim of this study was to compare the shear bond strength (SBS) and debonding characteristics of a polymer mesh base ceramic bracket bonded with two different surface conditioning methods. InVu Readi-Base ceramic brackets were bonded to 100 human premolars with different etching protocols. With conventional method (CM), the teeth were etched with 37 per cent phosphoric acid for 30 seconds, w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Fracture Mechanics
سال: 2021
ISSN: ['1873-7315', '0013-7944']
DOI: https://doi.org/10.1016/j.engfracmech.2021.107661