CHARACTERIZATION OF BAMBOO TUTUL CHARCOAL PARTICLE PRODUCED BY HIGH ENERGY BALL MILLING SHAKER TYPE
نویسندگان
چکیده
منابع مشابه
Al4C3/Ag Formation in an Aluminum Composite Produced by High-Energy Ball Milling
Aluminum and its alloys have a lot of industrial applications due to their appropriate physical and chemical characteristics. However, those present a modest mechanical performance. One method to improve its strenght is the addition of hard insoluble particles as: carbides (Al4C3, TiC), oxides (Al2O3) or nitrides (TiN, AlN), which can difficult the dislocation movement at atomic level, resultin...
متن کاملFormation of glassy Ti50Cu20Ni24Si4B2 alloy by high-energy ball milling
The elemental powder mixtures with a nominal composition of Ti50Cu20Ni24Si4B2 can be amorphized under high-energy ball milling. A well-defined glass transition before crystallization appears in the obtained amorphous phase during heating in a differential scanning calorimeter. Awide supercooled liquid region DTx is available to be about 57 K. Crystallization of the ballmilled amorphous phase wa...
متن کاملPreparation and Characterization of Hydroxyapatite/Alumina Nanocomposites by High-Energy Vibratory Ball Milling
Hydroxyapatite/alpha-alumina composites were prepared by means of high-energy vibratory ball milling. The effect of the addition of alumina, from 5 to 25 wt%, was investigated. x-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) results indicated thathydroxyapatite andaluminawere themajorphases aftermechanicalmilling and only small peak shifts were observed. Transmission...
متن کاملSynthesis of Silver Particle onto Bamboo Charcoal by Tripropylene Glycol and the Composites Characterization
In this study, tripropylene glycol was used as a reducting agent in the polyol process to reduce silver nitrate to the form of silver particles deposited onto the surface of bamboo charcoal (BC). The reduction temperature and time were critical parameters as they control the size of the silver particles formed as well as their distribution onto the surface of the BC. The reduction of silver nit...
متن کاملEVect of high energy ball milling on titanium– hydroxyapatite powders
to bone are concerned are brittle materials as exempli ed by hydroxyapatite and ‘Bioglass’. Bioactive coatings are This paper reports on an investigationof the potential employed on metal implants to facilitate bonding to bone use of high energy ball milling (HEBM) for the while retaining the good combination of mechanical production of homogeneous mixtures of titanium/ properties associated w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Media Mesin: Majalah Teknik Mesin
سال: 2019
ISSN: 2541-4577,1411-4348
DOI: 10.23917/mesin.v20i1.7978