Characterization of Alkanolamine Blends for Carbon Dioxide Absorption. Corrosion and Regeneration Studies
نویسندگان
چکیده
There are a lot of research programs focusing on the development new solvents for carbon dioxide capture. The most important priority should be reducing energy consumption needed at regeneration step, but minimizing solvent degradation and its corrosivity is also considered as priority. In this research, aqueous blends 2-amino-2-methyl-1-propanol (AMP: 1 kmol·m−3) 1-amino-2-propanol (MIPA: 0.1–0.5 characterized in terms density, viscosity, surface tension. absorption rate capacity, these evaluated.
منابع مشابه
Fabrication and Characterization of Polyetherimide Hollow Fiber Membrane Contactor for Carbon Dioxide Stripping from Monoethanolamine Solution
In this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. Aqueous solution of 1-methyl-2-pyrrolidine (NMP) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. The morphology of fabricated membranes...
متن کاملExperimental Investigation of Reactive Absorption of Ammonia and Carbon Dioxide by Carbonated Ammonia Solution
In this work, reactive absorption of gases in aqueous electrolyte solutions has been investigated resulting in the development of a procedure in order to calculate the concentrations of ionic and molecular species in the liquid phase. Two duplicate experiments were conducted to investigate simultaneous reactive absorption of ammonia and carbon dioxide in partially carbonated ammonia solutio...
متن کاملAbsorption of Carbon dioxide in Packed Column
The absorption of carbon dioxide into aqueous ammonia solution using packed column was investigated. The volumetric overall mass transfer coefficients (KGav) for CO2 absorption into aqueous ammonia solutions were evaluated over ranges of main operating variables , that is, upto 16kPa partial pressure of CO2, 61-214 m 3 /(m 2 .h) gas flow rate, 0.753.06 m 3 /(m 2 .h) liquid flow rate, 2%16% ammo...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainability
سال: 2021
ISSN: ['2071-1050']
DOI: https://doi.org/10.3390/su13074011