Characterization of AA6063/SiC-Gr Surface Composites Produced by FSP Technique
نویسندگان
چکیده
منابع مشابه
investigation on heat treatment and mechanical behaviour of al2024/gr composites produced by in-situ powder metallurgy
in this study, al/gr composites with 5,10,15,20 weight percent of graphite were produced by in-situ powder metallurgy method. the produced powder mixtures were consolidated and sintered at optimum conditions. the resultant composites were solution treated at 495?c and aged at 170?c. the influence of graphite content on the bending strength of composites was studied. the distribution of graphite...
متن کاملIsolation and Characterization of Polygalacturonase Produced by Tetracoccosporium sp.
Thirty-five fungal strains which isolated from vegetable wastes, were screened for the use of polygalacturonic acid as the sole carbon source. Twenty-five isolates were positive for polygalacturonase activity in cup-plate assay, as evidenced by clear hydrolysation zones. The most productive strain was determined by measuring clear zones formed around colonies stained with ruthenium red.</em...
متن کاملStatistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach
In order to improve the properties of aluminum and its alloys, some various approaches (e.g. reduction of grain size, addition of alloying elements and composite manufacturing) have been considered. Among all these processes, the use of solid-state processes such as the friction stir processing (FSP) is highly convenient to create surface composites at temperatures below the melting point. Ther...
متن کاملInvestigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)
Friction stir processing (FSP) was used for the fabrication of Al-B4C surface composite. Al-Mg-Si alloy was considered as the substrate and B4C particles were incorporated into the substrate by thermo-mechanical effect of FSP. The effect of tool dimensions and different rotational speeds on the microstructure and microhardness of the composite layers was evaluated and the optimum process parame...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2014
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.12.291