Characterization and Mechanical Properties of the ZA-12 Hybrid Composites Reinforced with Nano Ceramic Particles

Microstructure and Mechanical Properties of Mg-5Nb Metal-Metal Composite Reinforced with Nano SiC Ceramic Particles

In this work, a Mg-5Nb metal–metal composite was reinforced with nano SiC (SiCn) ceramic reinforcement of varying volume fractions, using the disintegrated melt deposition technique. The extruded Mg-5Nb-SiCn composites were characterized for their microstructure and mechanical properties. Based on the results obtained, it was observed that the volume fraction of nano-SiC reinforcement played an...

an inverstigation into the shrinkage behavior (kinetics) of microfilled hybrid and nano dental composites

چکیده ندارد.

Synthesis & Mechanical Characterization of Carbon/Epoxy Composites Reinforced with SiC Nano Particles

Room temperature cure epoxy resin has been doped with SiC nanoparticles through an ultrasonic cavitation process. The modified resin was then utilized in a Vacuum Assisted Resin Transfer Molding (VARTM) process with satin weave carbon fibers to manufacture nanophased composite panels. The nanoparticles were spherical in shape and about 29 nm in diameter. The loading of nanoparticles into the re...

Thermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method

MECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES

Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...