Characterization and Fabrication of Tin Oxide Thin Film by RF Reactive Sputtering

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effects of SR Irradiation on Tin-Doped Indium Oxide Thin Film Prepared by RF Magnetron Sputtering

Tin-doped indium oxide (ITO) thin films have been widely used as transparent electrodes of flat panel displays and solar cells because of its low electrical resistivity and high transmittance to visible light. In order to improve the electrical and optical properties of ITO thin films, many attempts have been carried out by means of several methods, for example, highly dense plasma assisted ele...

متن کامل

Thickness Dependence of Sensitivity in Thin Film Tin Oxide Gas Sensors Deposited by Vapor Pyrolysis

Transparent SnO2 thin films were deposited on porcelain substrates using a chemical vapor deposition technique based on the hydrolysis of SnCl4 at elevated temperatures. A reduced pressure self-contained evaporation chamber was designed for the process where the pyrolysis of SnCl4 at the presence of water vapor was carried out. Resistive gas sensors were fabricated by providing ohmic contacts o...

متن کامل

The Effect of Substrate on Structural and Electrical Properties of Cu3N Thin Film by DC Reactive Magnetron Sputtering

The aim of this paper is to study the effect of substrate on the Cu3N thin films. At first Cu3N thin films are prepared using DC magnetron sputtering system. Then structural properties, surface roughness, and electrical resistance are studied using X-ray diffraction (XRD), the atomic force microscope (AFM) and four-point probe techniques respectively. Finally, the results are investigated and c...

متن کامل

Characterization of PZT Ferroelectric Thin Films by RF-magnetron Sputtering

By using Radio Frequency (RF) magnetron sputtering method, Pb(Zr0.5Ti0.5)O3 (PZT) thin films were deposited on Pt/Ti/ SiO2/Si substrates. Pt/Ti bottom electrode was fabricated on SiO2/Si substrates by magnetron dual-facing-target sputtering system. Phase and crystalline structure analyses of the PZT films were performed on an X-ray diffraction(XRD), Surface morphology, roughness and particle si...

متن کامل

HRTEM Microstructural Characterization of β-WO3 Thin Films Deposited by Reactive RF Magnetron Sputtering

Though tungsten trioxide (WO3) in bulk, nanosphere, and thin film samples has been extensively studied, few studies have been dedicated to the crystallographic structure of WO3 thin films. In this work, the evolution from amorphous WO3 thin films to crystalline WO3 thin films is discussed. WO3 thin films were fabricated on silicon substrates (Si/SiO2) by RF reactive magnetron sputtering. Once a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Korean Journal of Materials Research

سال: 2010

ISSN: 1225-0562

DOI: 10.3740/mrsk.2010.20.9.494