Characteristics Particleboard Made From Areca Fiber With Tapioca and Gambier Adhesive
نویسندگان
چکیده
منابع مشابه
Characteristics of Particleboard Made from Sedar Chips and Wood Slabs (TECHNICAL NOTE)
This study was Characteristics of manufacture particleboard (PB) from sedar and wood slab of impregnated with UF. The chips were divided into coarse chips with dimensions of 2-4 mesh and fine chips of 30–60 mesh, urea formaldehyde (UF) resin solution at concentrations of 45 %, and 55% sprayed on these chips about 1 min until 10% to dry weight chips, they were dried under 5% moisture in a dram d...
متن کاملProperties of Particleboard Made from UF with Low-formaldehyde (E1) (TECHNICAL NOTE)
The objective of this study was to manufacture particleboard made from UF with low formaldehyde (E1) for use in indoor environments. The influence of UF in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with consumption UF-low formaldehyde- particle. Formaldehyde e...
متن کاملProperties of particleboard made from recycled CCA-treated wood
Recovery of chromated copper arsenate (CCA)-treated wood for reuse has been the focus of several international research groups due to the imminent disposal problem created when large quantities of CCA-treated wood ultimately come out of service. Bioleaching with Bacillus licheniformis CC01 and oxalic acid extraction are two methods known to remove significant quantities of metals from CCA-treat...
متن کاملLeachability and decay resistance of particleboard made from acid extracted and bioremediated CCA-treated wood
Composite manufacturing appears to be one of the most suitable recycling options for chromated copper arsenate (CCA)-treated waste wood. However, in many applications it would be beneficial to remove much or all of the CCA from the wood prior to composite production. This paper evaluates the effect of remediation processes, namely oxalic acid (OA) extraction and Bacillus licheniformis fermentat...
متن کاملPreparation and Mechanical Characterization of Particleboard Made from Maritime Pine and Glued with Bio-adhesives Based on Cornstarch and Tannins♣
In this presented work, we describe the development and characterization of a new, environmentally friendly adhesive derived from cornstarch and tannins. The production of wood composites mainly relies on the petrochemical-based and formaldehyde-based adhesives such as urea formaldehyde (UF), phenol formaldehyde (PF) and melamine urea formaldehyde (MUF), which can generate under certain conditi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Teknomekanik
سال: 2021
ISSN: 2621-8720,2621-9980
DOI: 10.24036/teknomekanik.v4i1.9372