Characteristics of Work Hardening and Anneal Softening of Titanium Base Ti-Al Alloy Wires
نویسندگان
چکیده
منابع مشابه
The Anneal Hardening and Deformation Softening Behaviors of Nanocrystalline Cu-Zn Alloys
The changes in the mechanical properties and microstructure of nanocrystalline Cu-Zn alloys deformed by cryorolling during low temperature annealing and the post-process deformation were studied. The deformed Cu-Zn alloys exhibited uncommon anneal hardening and deformation softening behaviors. The degree of anneal hardening and deformation softening increased with the addition of the solute ato...
متن کاملEffects of titanium nitride coatings on surface and corrosion characteristics of Ni-Ti alloy.
The structure of a titanium nitride film coated by arc ion plating on a Ni-50Ti shape memory alloy was characterized by X-ray photoelectron spectroscopy (XPS). The corrosion behavior of the titanium nitride-coated Ni-50Ti alloy was examined in 0.9% NaCl solution by potentiodynamic polarization measurements and a polarization resistance method. XPS spectra showed that the titanium nitride film c...
متن کاملCutting Properties Analysis of Titanium Alloy (Ti-6Al-4V) Base on Cryogenic Cooling
This paper studied the cutting properties of Ti-6Al-4V under cryogenic cooling to find a solution of improvement in tool load-carrying, thermal stress, tool life and finish quality. Firstly, this paper established a 3-D cutting model of Ti-6Al-4V under cryogenic cooling with liquid nitrogen, and then set the parameters of material, friction model and cutting conditions. Based on this model, the...
متن کاملPrecision Grinding of Titanium (Ti-6Al-4V) Alloy Using Nanolubrication
In this current era of competitive machinery productions, the industries are designed to place more emphasis on the product quality and reduction of cost whilst abiding by the pollution-preventing policy. In attempting to delve into the concerns, the industries are aware that the effectiveness of existing lubrication systems must be improved to achieve power-efficient and pollutionpreventing ma...
متن کاملPrecipitation Hardening Behavior of Directly Cold Rolled Al-6Mg Alloy Containing Ternary Sc and Quaternary Zi/Ti
Ageing of 75% cold rolled Al-6Mg alloy with ternary 0.4 wt% scandium and quaternary zirconium and titanium has been carried out. Alloy samples are naturally, isochronally and isothermally aged for different time and temperatures. Hardness values of the differently processed alloys have been measured to understand the ageing behavior of Al-6Mg alloy with scandium and quaternary zirconium and tit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1957
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.21.5_360