Characteristics of Thermal Buckling for Cross-Ply Laminates.
نویسندگان
چکیده
منابع مشابه
Acoustic emission monitoring of degradation of cross ply laminates.
The scope of this study is to relate the acoustic activity of damage in composites to the failure mechanisms associated with these materials. Cross ply fiber reinforced composites were subjected to tensile loading with recording of their acoustic activity. Acoustic emission (AE) parameters were employed to monitor the transition of the damage mechanism from transverse cracking (mode I) to delam...
متن کاملDeflection of Cross-Ply Composite Laminates Induced by Piezoelectric Actuators
The coupling effects between the mechanical and electric properties of piezoelectric materials have drawn significant attention for their potential applications as sensors and actuators. In this investigation, two piezoelectric actuators are symmetrically surface bonded on a cross-ply composite laminate. Electric voltages with the same amplitude and opposite sign are applied to the two symmetri...
متن کاملThe Formation and Effect of Outer-Ply Microcracks in Cross-Ply Laminates: A Variational Approach
The microcracking process in laminates which have outer-ply 90◦ plies (e.g. [90m/0n]s) has some important differences from the microcracking process in laminates which lack outer-ply 90◦ plies (e.g. [0n/90m]s). Foremost among the differences is the characteristic damage state. [90m/0n]s laminates form antisymmetric or staggered microcracks while [0n/90m]s laminates form symmetric microcracks. T...
متن کاملThermal expansion of unidirectional and cross-ply fibrous monoliths
An investigation of the thermal expansion behavior of ceramic fibrous monoliths (FMs) is presented. The emphasis is on the development and validation of material models applicable to Si3N4/BN FMs in both unidirectional and cross-ply architectures. Approximate analytical models are developed for the coefficient of thermal expansion (CTE) based on the analysis of representative unit cells of the ...
متن کاملFailure Criterion for Two-Ply Plain-Weave CFRP Laminates
We present an experimentally-based failure criterion for symmetric two-ply plain-weave laminates of carbon-fiber reinforced plastic. The criterion is formulated in terms of six force and moment stress resultants and consists of a set of three inequalities, related to in-plane, bending, and combined in-plane and bending types of failure. All failure parameters in the criterion are measured direc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1995
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.61.2168