Characteristics of the Transient Gas Diffusion Flame
نویسندگان
چکیده
منابع مشابه
Flame Stability and Structure of Liquefied Petroleum Gas-Fired Inverse Diffusion Flame with Hydrogen Enrichment
The present project was conducted with the circumferential-fuel-jets inverse diffusion flame (CIDF) burner burning liquefied petroleum gas (LPG) enriched with 50% of hydrogen fuel (H2). The range of stable operation of the CIDF burner in terms of Reynolds number (from laminar to turbulent flow regions), equivalence ratio and fuel jet velocity of LPG of the 50% H2-LPG mixed fuel was identified. ...
متن کاملRadiation modeling of a turbulent diffusion flame in diesel engine
The purpose of this study is to investigate the effect of radiation heat transfer on temperature distribution and heat flux to the walls of a diesel engine. A diffusion flame is modeled in a simple cylindrical geometry and boundary conditions are defined. A specific solver which can model the turbulent diffusion flame by considering radiation in participating media is used to solve the problem....
متن کاملCharacteristics of Transient Behavior of Gas Flow in Microchannels
In this paper, a three-dimensional numerical model of transient incompressible gaseous flow in microchannels was established. The influence of changing the inlet velocity on the transient fluid flow is analyzed – using finite volume software (Fluent 6.3). The study showed that the transient period is decreased when the inlet velocity is increased, the maximum velocity is almost twice the entran...
متن کاملExperimental and Numerical Studies of Paraguayan Chaco Natural Gas in a Counterflow Diffusion Flame
Combustion is a chemical phenomenon in which a multitude of elementary chemical reactions take place, resulting in the overall process of fuel oxidation. Natural gas fuel has been explored for a few decades and extracted for a few years in the region of Paraguayan Chaco, near Bolivia border. Currently, natural gas is not very important in Paraguay’s energy matrix, however it could be in the nea...
متن کاملThe Effect of a Flame Holder Shape Modification Toward the Diffusion Flame Stability Zone Shift
The flame stability limit, which was involving the critical flow condition, lift off and blow out, could be affected by the burner geometry in the combustion system installation. Consequently a flame holder should be put in, to hold the flame as big as possible on a stable condition. The flame holder itself, is a device to hold the flame, whereas the flame holder could disturb the air and fuel ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers Series B
سال: 1997
ISSN: 1884-8346,0387-5016
DOI: 10.1299/kikaib.63.605_311