Characteristics of Stainless Steel Composites with Nano-sized TiCxNy
نویسندگان
چکیده
منابع مشابه
Evaluation of load-deflection properties of fiber-reinforced composites and its comparison with stainless steel wires
BACKGROUND The aim of this study was to evaluate the response of common sized fiber-reinforced composites (FRCs) to different deflections due to bending forces and comparing it with stainless steel (SS) wires. MATERIALS AND METHODS In this experimental study, two FRC groups with 0.75 mm and 1.2 mm diameters (Everstick Ortho, Stick Tech, Finland) and three SS groups with 0.016 × 0.022 inch, 0....
متن کاملCompressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers
Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...
متن کاملStainless Steel Type 316Ti
Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...
متن کاملStrengthening of Low-Alloy Hot-Forging Steel with Nano- sized Precipitation
3 IMR KINKEN Research Highlights 2012 IMR KINKEN Research Highlights 2012 To reduce the fuel consumption by automobiles, medium carbon steels for forging parts, such as shafts and connecting rods, must be further strengthened. When carbide-forming elements such as Ti, Nb, and V, are alloyed with carbon steels, a fine dispersion of alloy carbides and large precipitation hardening can be achieved...
متن کاملHeat Transfer Characteristics of a Speaker Using Nano-Sized Ferrofluid
The purpose of this article is to study the heat transfer characteristics of a voice-coil and permanent magnet for a speaker using nano-sized ferrofluid. In order to investigate the temperature characteristics of the speaker, the speaker power ratings, ambient temperatures of the test chamber, chamber sizes and input signals were tested. As a result, the temperatures of the voice-coil and magne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Powder Metallurgy Institute
سال: 2011
ISSN: 1225-7591
DOI: 10.4150/kpmi.2011.18.3.290