Characteristics of Pyrolysis Products of Bori Lignite Briquette
نویسندگان
چکیده
منابع مشابه
Pyrolysis Process and Characteristics of Products from Sawdust Briquettes
The pyrolysis of briquettes made from biomass is an available and economic technological route for the production of briquette charcoal, but by-products (tar and gas) cannot be brought into full utilization, leading to the waste of resources and the addition of environmental concerns. Temperature is the most important parameter that affects the distributions and properties of briquette charcoal...
متن کاملPyrolysis products of PCBs.
Model compound studies which were previously done for impurities and environmental residues of chlorophenols and for wastes of chlorination processes were extended to the impurities and pyrolysis products of polychlorinated biphenyls (PCBs). Model compounds were commercial products or synthesized and their structures proven by spectroscopic methods. These models were used as analytical referenc...
متن کاملMolecular products from the pyrolysis and oxidative pyrolysis of tyrosine.
The thermal degradation of tyrosine at a residence time of 0.2s was conducted in a tubular flow reactor in flowing N2 and 4% O2 in N2 for a total pyrolysis time of 3min. The fractional pyrolysis technique, in which the same sample was heated continuously at each pyrolysis temperature, was applied. Thermal decomposition of tyrosine between 350 and 550°C yielded predominantly phenolic compounds (...
متن کاملPyrolysis Products of Pinus Radiata Bark
The yields of char, tar, and non-condensible gases from the pyrolysis of Pinus radiata D. Don bark were measured. Pyrolysis of bark, on a small preparative scale using an airacetylene flame, gave 48% char with ash content 3.5% (mainly aluminium, calcium, potassium, and silica), and recovered tar in 7% yield (on oven-dried bark equivalent). The major components of the pyrolysis tar were catechol...
متن کاملThe effects of phosphoric acid and pyrolysis temperature to the formation of flaky graphite from lignite
The flaky graphites were prepared from lignite. The effects of phosphoric acid ratios and pyrolysis temperatures on flake formation were studied by SEM, TEM and XRD. The results showed that the flaky graphite occurred at a pyrolysis temperature of 600°C with a 1.0:1.0 ratio of carbon to phosphoric acid. The flaky formation was almost completed by pyrolysis at 800°C and with a 1:2.0 ratio of car...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2012
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2012.01.051