Characteristics of Pd-doped WO3thin film for hydrogen gas sensor
نویسندگان
چکیده
منابع مشابه
Fabrication of Pd Doped WO3 Nanofiber as Hydrogen Sensor
Pd doped WO3 fibers were synthesized by electro-spinning. The sol gel method was employed to prepare peroxopolytungstic acid (P-PTA). Palladium chloride and Polyvinyl pyrrolidone (PVP) was dissolved in the sol Pd:WO3 = 10% molar ratio. The prepared sol was loaded into a syringe connected to a high voltage of 18.3 kV and electrospun fibers were collected on the alumina substrates. Scanning elect...
متن کاملTriboelectric Hydrogen Gas Sensor with Pd Functionalized Surface
Palladium (Pd)-based hydrogen (H₂) gas sensors have been widely investigated thanks to its fast reaction and high sensitivity to hydrogen. Various sensing mechanisms have been adopted for H₂ gas sensors; however, all the sensors must be powered through an external battery. We report here an H₂ gas sensor that can detect H₂ by measuring the output voltages generated during contact electrificatio...
متن کاملSensing Properties of Pd-Loaded Co3O4 Film for a ppb-Level NO Gas Sensor
We prepared 0.1 wt%-30 wt% Pd-loaded Co3O4 by a colloidal mixing method and investigated the sensing properties of a Pd-loaded Co3O4 sensor element, such as the sensor response, 90% response time, 90% recovery time, and signal-to-noise (S/N) ratio, toward low nitric oxide (NO) gas levels in the range from 50 to 200 parts per billion. The structural properties of the Pd-loaded Co3O4 powder were ...
متن کاملEffects of palladium on the optical and hydrogen sensing characteristics of Pd-doped ZnO nanoparticles
The effect of palladium doping of zinc oxide nanoparticles on the photoluminescence (PL) properties and hydrogen sensing characteristics of gas sensors is investigated. The PL intensity shows that the carrier dynamics coincides with the buildup of the Pd-related green emission. The comparison between the deep level emission and the gas sensing response characteristics allows us to suggest that ...
متن کاملRegiospecific linear assembly of Pd nanocubes for hydrogen gas sensing.
Capillary force lithography was applied to generate large area polymer patterns. A "grafting to" approach was used on the patterns to induce linear assembly of Pd nanocubes through electrostatic interaction. Pd nanoarrays with high density were subjected to a hydrogen gas sensing test. We demonstrated a feasible method to build up a miniature hydrogen sensor using self-assembly with micrometre ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Sensor Science and Technology
سال: 2006
ISSN: 1225-5475
DOI: 10.5369/jsst.2006.15.2.120