Characteristics of Heat Transfer Inside Vertical Tube in FBR Steam Generator
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Heat Transfer in a Vertical Inverted U–Tube Steam Generator
In this paper, a numerical scheme has been developed for primary and secondary fluids adopting Euler–Cauchy method to find the temperature distribution of the primary fluid relative to the secondary fluid and vice–versa and to obtain an optimum boiling length of the tube in the vertical inverted U–tube steam generator (UTSG).
متن کاملTwo Phase Heat Transfer Characteristics in a Vertical Small Diameter Tube at Sub Atmospheric Pressure
Two-phase heat transfer is experimentally examined through vertical small diameter tubes, D =1.45 and 2.8 mm using water under a pressure of 50 to 81 kPa and a natural circulation condition. The pool boiling correlation by Stephan-Abdelsalam and the thermosyphon boiling correlation by Imura, et al. predict the measured experimental data in the 2.8 mm tube with an error of -30%. A large heat tra...
متن کاملHeat Transfer and Carryover in the Dryout of a Heated Vertical Tube
This work concerns dryout experiments in which a tube, initially containing water, filled up or partially filled and at 1,2 or 3 atmosphere pressures, is heated. The initial water column experience three thermal regions. The first region, called the first period, involves heating of the tube until saturation conditions are obtained in the water. Boiling of the water in the tube causes swelling ...
متن کاملConvective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube
Abstract An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ul...
متن کاملOverview of Steam Generator Tube-Inspection Technology
Degradation of steam generator (SG) tubing due to both mechanical and corrosion modes has resulted in extensive repairs and replacement of SGs around the world. The variety of degradation modes challenges the integrity of SG tubing and, therefore, the stations’ reliability. Inspection and monitoring aimed at timely detection and characterization of the degradation is a key element for ensuring ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Atomic Energy Society of Japan
سال: 2009
ISSN: 2186-2931,1347-2879
DOI: 10.3327/taesj.j08.002