Characteristics of GaAs complementary heterojunction FETs (C-HFETs) and C-HFET based amplifiers exposed to high neutron fluences
نویسندگان
چکیده
منابع مشابه
Effects of D-Doping on Characteristics of AlAs/GaAs Barriers Grown by Mba at 400 ??C
Effects of d-doping on barriers effective heights and series resistance of highly doped n-type GaAs/AIAs/GaAs/AlAs/GaAs heterostructures, grown by molecular beam epitaxy (MBE) at 400?°C, have been studied. As it was expected, inclusion of an n+ d-doped layer at each hetero-interface has reduced the barriers heights and series resistance of the structure significantly, while p+ d-doped layers ha...
متن کاملDegradation Mechanisms of GaN HFETs: Comparison With GaAs Based HEMTs
Wide bandgap semiconductors are extremely attractive for the gamut of power electronics applications from power conditioning to microwave transmitters for communications and radar. Of the various materials and device technologies, the AlGaN/GaN high-electron mobility transistor seems to be the most promising. While GaN device and circuit technology is poised to break out in the commercial arena...
متن کاملCavity structure GaAs FETs with high humidity resistance
Abstract We have developed new cavity structure GaAs FETs with high humidity resistance. The cavity is formed by sealing up with air bridges and polymers around the FETs and covering the surface of the polymers with thick SiN films. As the cavities formed by the newly-developed process are completely airfilled, the high frequency characteristics of FETs are unaffected by the parasitic capacitan...
متن کاملAlGaN/GaN HFET Design for Switching Applications
GALLIUM NITRIDE based heterojunction field-effect transistors (HFETs) show great promise for high-frequency, high-power, and high-temperature applications. Many researchers have fabricated AlGaN/GaN HFETs with very impressive results, including a device with a current handling capability of 1.25 A/mm on SiC substrates[2]. Assuming a sheet charge density of 1.4×1013 cm−2, and a saturation veloci...
متن کاملMechanical Behaviour of Cyanate Ester/epoxy Blends after Reactor Irradiation to High Neutron Fluences
The mechanical strength of conventional epoxy resins drops dramatically after irradiation to a fast neutron fluence of 1x10 m (E>0.1 MeV). Recent results demonstrated that cyanate ester / epoxy blends were not affected at this fluence level. The aim of this study is to investigate the performance potential of these blends at higher fluence levels without significant degradation of their mechani...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
سال: 1995
ISSN: 0168-9002
DOI: 10.1016/0168-9002(95)00180-8