Characteristics of Air-Water Flows in Micro-grooved Evaporator Flat Channels with a Sharp 180-Degree Turn.
نویسندگان
چکیده
منابع مشابه
Steady state operation of a copper-water LHP with a flat-oval evaporator
In order to dissipate the heat generated by electronic boxes in avionic systems, a copperwater LHP with a flat-oval evaporator was fabricated and tested at steady-state. The LHP consists of a flat shaped evaporator, 7 mm thick, including compensation chamber with attached heat exchanger. The condenser is cooled by forced convection of liquid. The variable parameters are the heat sink and ambien...
متن کاملShallow Water Flows in Channels
We consider the shallow water equations for flows through channels with arbitrary cross-section. The system forms a hyperbolic set of balance laws. Exact steady-state solutions are available and are controlled by the relation between the bottom topography and the channel geometry. We use a Roetype upwind scheme for the system. Considerations of conservation, near steady-state accuracy, velocity...
متن کاملPatterning flows using grooved surfaces.
Through a simple analytical description we quantify how pressure-driven flows over grooved surfaces develop transverse components, which, for shallow grooves, can be modeled with simple anisotropic effective boundary conditions. Helical recirculation results in channels or capillaries with grooved walls. An experimental validation of our model is presented. Our analysis provides a workable guid...
متن کاملAir–water flow characteristics in high-velocity free-surface flows with 50% void fraction
High-velocity free-surface flows are complex two-phase flows and limited information is available about the interactions between air and water for void fractions of about 50%. Herein a detailed experimental study was conducted in the intermediate flow region ( C ∼ 50%) on a stepped spillway and the microscopic air–water flow characteristics were investigated. The results showed differences in w...
متن کاملNumerical Simulation of Conjugated Heat Transfer Characteristics of Laminar Air Flows in Parallel-Plate Dimpled Channels
This paper presents a numerical study on surface heat transfer characteristics of laminar air flows in parallel-plate dimpled channels. The two-dimensional numerical model is provided by commercial code FLUENT and the results are obtained for channels with symmetrically opposing hemi-cylindrical cavities onto both walls for Reynolds number ranging from 1000 to 2500. The influence of variations ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1998
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.64.2273