Characteristic Features of Plasma Electrolytic Treated Layers in Na 3 PO 4 Solution
نویسندگان
چکیده
منابع مشابه
preparation of 3, 4-dihydropyrimidin-2(1H)-ones using quaternary ammonium- treated clay in water
In this study, a variety of 3, 4-dihydropyrimidin-2(1H)-ones derivatives were synthesized via three-component Biginelli reaction. The quaternary ammonium- treated clay -catalyzed process proved to be simple, efficient, and environmentally friendly.
متن کاملSound Absorption Characteristics of Aluminum Foams Treated by Plasma Electrolytic Oxidation
Open-celled aluminum foams with different pore sizes were fabricated. A plasma electrolytic oxidation (PEO) treatment was applied on the aluminum foams to create a layer of ceramic coating. The sound absorption coefficients of the foams were measured by an impedance tube and they were calculated by a transfer function method. The experimental results show that the sound absorption coefficient o...
متن کاملProcess Monitoring of Plasma Electrolytic Oxidation
Plasma electrolytic oxidation (PEO) is a potential technique to coat a dense ceramic oxide layer on the surface of light metals, e.g. Al, Mg or Ti. In our PEO process, Al-pieces are emerged in aqueous solutions containing dissolved silicate/alkali, e.g. KOH/NaOH and K 2 SiO 3 /Na 2 SiO 3. Using a DC-pulsed system with 20Hz, micro-arcs are induced at the surface of the pieces randomly and plasma...
متن کاملMMo(3)Se(3) (M = Li(+), Na(+), Rb(+), Cs(+), NMe(4)(+)) nanowire formation via cation exchange in organic solution.
Currently, there is intensive research driving toward developing suitable one-dimensional (1D) conducting molecular wires because of their potential use as building blocks for molecular-scale electronic devices.1 One appealing approach for obtaining molecular wires is the disassembly of quasi-1D crystals2,3 such as LiMo3Se3 into structurally and electronically identical molecular wires. These l...
متن کاملControl capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers
Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.04.149