Characteristic Bending Recovery of Ni-Ti Orthodontic Wires
نویسندگان
چکیده
منابع مشابه
Ni-Ti orthodontic archwires at different temperatures
Orthodontic mechanotherapy encompasses the use of several archwires during speci c stages of treatment. Metallic orthodontic appliances consist of bands, arch wires, ligature wires, hooks, tubes, brackets, and springs are daily used in orthodontic practices for the correction of malocclusions in patients ( Oh et al. , 2004 ; Verstrynge et al. , 2006 ; Sabane et al. , 2009 ). One of the most im...
متن کاملThe Effect of Residence Time on the Tensile Properties of Superelastic and Thermal Activated Ni-Ti Orthodontic Wires
Department of Odontology, Federal University of Rio Grande do Norte – UFRN, CP 1524, CEP 59072-970, Lagoa Nova Campus, Natal, RN, Brazil Department of Materials Engineering, Federal University of São Carlos – UFSCar, CEP 13565-905, São Carlos, SP, Brazil Department of Materials Engineering, Federal University of Rio Grande do Norte – UFRN, CP 1524, CEP 59072-970, Lagoa Nova Campus, Natal, RN, B...
متن کاملTorsional properties of Ni-Ti and copper Ni-Ti wires: the effect of temperature on physical properties.
The stress-strain behaviour of two Ni-Ti and two Copper Ni-Ti orthodontic wires was examined in induced torsion under controlled conditions of moment and temperature. The tests clearly demonstrate the diversity of behaviour of these wires. The loading and unloading curves and plateau regions were found to be closely related to temperature with stiffness varying dramatically over mouth temperatu...
متن کاملLoad-Deflection and Friction Properties of PEEK Wires as Alternative Orthodontic Wires
Polyetheretherketone (PEEK) is now attracting attention as an alternative to metal alloys in the dental field. In the present study, we evaluated the load-deflection characteristics of PEEK wires in addition to their frictional properties. Three types of PEEK wires are used: two sizes of rectangular shape, 0.016 × 0.022 in² and 0.019 × 0.025 in² (19-25PEEK), and rounded shape, diameter 0.016 in...
متن کاملBending Property of Super-Elastic Ti-Ni Alloy Dental Castings with Different Heat Treatments
Bending property of Ti-Ni alloy dental castings was evaluated in comparison with that of Co-Cr alloy in a cantilever test. Heat treatment effect on the bending property was also investigated in relation to phase transformation. Ti-50.85Ni (mol%) alloy was used, and the shape of bending test specimens was half-rounded in cross section, 2.0mm in diameter. The bending test was carried out at 310K....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Kyushu Dental Society
سال: 1997
ISSN: 0368-6833,1880-8719
DOI: 10.2504/kds.51.165