Characterisation of UHMWPE Polymer Powder for Laser Sintering
نویسندگان
چکیده
منابع مشابه
Post Treatment Process and Selective Laser Sintering Mechanism of Polymer-Coated Mo Powder
A novel preparing method of polymer-coated molybdenum powder was presented. A type of multi-component polymer-coated molybdenum powder was chosen for selective laser sintering. The effect of the process parameters on the part’s characteristics is investigated. Based on our study for dynamic laser sintering process of polymer-coated molybdenum powder, its laser sintering mechanism was reported a...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کاملLaser Penetration in a Powder Bed during Selective Laser Sintering of Metal Powders: Simulations versus Experiments
To gain a better understanding and control of the Selective Laser Sintering (SLS) process, more fundamental and modeling work is needed. A simple analytical ray-tracing model has been developed to simulate the energy absorption and penetration in SLS. The model is applied to FeCu and WC-Co powder mixtures, irradiated by Nd-YAG or CO2 laser. It gives an evaluation of the total energy incoupling ...
متن کاملPowder Life Cycle Analyses for a New Polypropylene Laser Sintering Material
When processing polymers in laser sintering, material aging occurs. The consequences of these aging effects are changes of material and part properties. A reduction of surface quality and the occurrence of orange peel are often found when using a material of too high viscosity. These effects are well known when processing polyamide 12. For alternative materials there is only little knowledge on...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12213496