Characterisation of fibre-reinforced backfill/rock interface through direct shear tests
نویسندگان
چکیده
منابع مشابه
Punching shear strength of steel fibre reinforced concrete slabs
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...
متن کاملA shear-lag model with a cohesive fibre–matrix interface for analysis of fibre pull-out
A shear-lag model with a cohesive fibre–matrix interface has been developed for the analysis of stress transfer between the fibre and the matrix in fibre-reinforced composites in this paper. A bilinear cohesive damage evolution law is used to describe the fibre–matrix interface behaviour. The governing equations for the interfacial shear stress and the axial stress in the fibre are derived. Acc...
متن کاملGlass Fibre Reinforced Concrete
Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...
متن کاملCharacterisation of natural fibre reinforced PLA foams prepared by supercritical CO 2 assisted extrusion
Natural fibre reinforced polylactic acid (PLA) foams, as potential green replacements for petroleum-based polymer foams, were investigated. Highly porous (ε > 95%) microcellular PLA foams were manufactured by supercritical CO2 assisted extrusion process. To overcome the inherent low melt strength of PLA, epoxyfunctionalized chain extender was applied, while talc was added to improve its crystal...
متن کاملAdvanced X-Ray Tomographic Methods for Quantitative Characterisation of Carbon Fibre Reinforced Polymers
In recent years, a strongly growing demand of aeronautic industry for light weight materials like carbon fibre reinforced polymers (CFRP) motivated by economic and environmental issues is observed. The main interest of using CFRP composites is based on weight reduction, and on the high fatigue resistance capabilities. The next generation aircrafts, as the Airbus A350 XWB aim to be made of more ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Geotechnical Research
سال: 2020
ISSN: 2052-6156
DOI: 10.1680/jgere.19.00029