Characterisation of calcined raw clays suitable as supplementary cementitious materials
نویسندگان
چکیده
منابع مشابه
EFFICIENCY FACTOR OF SUPPLEMENTARY CEMENTITIOUS MATERIALS: A STATE OF ART
The use of supplementary cementing materials is gradually increasing due to technical, economical, and environmental benefits. Supplementary cementitious materials (SCM) are most commonly used in producing ready mixed concrete (RMC). A quantitative understanding of the efficiency of SCMs as a mineral admixture in concrete is essential for its effective utilisation. The performance and effective...
متن کاملUsing Different Methods of Nanofabrication as a New Way to Activate Supplementary Cementitious Materials; a Review
Reducing the consumption of cement with simultaneous utilizing waste materials as cement replacement is preferred for reasons of environmental protection. Blended cements consist of different supplementary cementitious materials (SCMs), such as fly ash, silica fume, Ground Granulated Blast Furnace Slag (GGBFS), natural pozzolans, etc. These materials should be chemically activated to show effec...
متن کاملHigh-Temperature Release of SO2 from Calcined Cement Raw Materials
During combustion of alternative fuels in the material inlet end of cement rotary kilns, local reducing conditions may occur and cause reductive decomposition of sulfates from calcined cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, whichmay cause deposit formation in the kiln system. In this study, the release of sulfur from ...
متن کاملBest Practices for Concrete Pavements / Supplementary Cementitious Materials Tech brief
Hydraulic activity refers to a property most familiar when discussing hydraulic cement such as ordinary portland cement (OPC). ASTM C125-15a defines hydraulic cement as “a cement that sets and hardens by chemical reaction with water and is capable of doing so under water.” That is, hydraulic cements, including SCMs that have hydraulic properties, react with water to harden, and that hardening p...
متن کاملCharacterisation of Biologically Pretreated Raw Materials for Biopulping Process
Biopulping, the treatment of wood chips by white rot fungi and subsequent chip refining is envisioned as a method for saving energy and making a stronger paper product. The present study aims to find suitability of two fungal isolates Phellinus pectinatus and Daedaleopsis confragosa for the process of biopulping and the characteristion of the biologically pretreated raw materials for biopulping...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Clay Science
سال: 2018
ISSN: 0169-1317
DOI: 10.1016/j.clay.2018.06.030