Channeled Ni-YSZ Cermets Produced from NiO-YSZ Eutectics by Laser Melting
نویسندگان
چکیده
منابع مشابه
Mechanical properties of highly textured porous Ni - YSZ and Co - YSZ cermets produced from Directionally Solidified Eutectics
It is well known that several ceramic materials develop an usual; and sometimes unique; combination of properties as a result of mixing different phases with similar expansion coefficients. Sometimes they are elastically stiff, have relatively low thermal expansion coefficients, good thermal and electrical conductivities, and are resistant to chemical attack. As this paper will show, their mech...
متن کاملCompositionally graded YSZ-NiO composites by surface laser melting
Laser surface melting has been applied to near eutectic NiO-YSZ sintered ceramics. The objective is to generate a functional gradient composite material with graded microstructure and composition. At low solidification rates the resultant material has a graded composition, with a severe NiO segregation towards the surface. A thick NiO layer whose thickness depends on the travelling speed is for...
متن کاملProperties of Ni/ysz Cermets Depending on Their Microstructure
A cermet (ceramic metal composite) of Nickel and Yttria stabilized Zirconia (YSZ) is the most commonly used fuel electrode for Solid Oxide Fuel Cells (SOFC). The properties of such cermets depend strongly on their microstructure. Several Ni/YSZ cermet samples with different Ni content and Ni and 8YSZ grain size have been prepared. The thermal expansion coefficient (TEC) of these samples was mea...
متن کاملPreparation of NiO-YSZ/YSZ bi-layers for solid oxide fuel cells by electrophoretic deposition
A simple and cost-effective method, starting with electrophoretic deposition (EPD) on a carbon sheet, has been developed for preparation of a iO-YSZ anode and thin, gas-tight YSZ electrolyte layer on it for use in solid oxide fuel cells (SOFCs). The innovative feature of this approach nables the deposition of anode materials as well as the YSZ electrolyte, which were subsequently co-fired in ai...
متن کاملEffect of H2S on the Thermodynamic Stability and Electrochemical Performance of Ni Cermet-type of Anodes for Solid Oxide Fuel Cells
For SOFCs to be main means of power generation, they should be able to exploit wide variety of fuels. Among Ni-cermets, Ni-YSZ is the state-of-the-art materials for the anode in SOFC which is the fuel electrode. But sulphur impurity present in different gaseous fuels (e.g Biogas), depending on its concentration, is highly poisonous to the stability and electrochemical performance of the Ni cata...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2005
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200507.1257pv