Change of stress regime during geothermal reservoir stimulation
نویسندگان
چکیده
منابع مشابه
Heating in a Geothermal Reservoir
A computer program in Visual Basic 6.0 is written to calculate steam tables for pure water up to 800oC and 1400 bar. The steam tables are created as a DLL (Dynamic Link Library) object with properties: temperature, pressure, specific volume, enthalpy and entropy for liquid and vapor phases, and liquidvapor state. The steam tables can be incorporated in any computer program on the Windows platfo...
متن کاملPrecise Gravimetry and Geothermal Reservoir Management
Modern portable gravimeters can routinely achieve a 5 ugal uncertainty with careful measurement procedures involving multiple station occupations in the same day, and stacking of readings over at least 15 minutes during each occupation. Although further improvements in gravimeter accuracy are feasible, other practical factors relating to repeat surveys of geothermal fields make such improvement...
متن کاملFracture Network Modeling of a Hot Dry Rock Geothermal Reservoir
Fluid flow and tracer transport in a fractured Bot Dry Rock (HDR) geothermal reservoir are modeled using fracture network modeling techniques. The steady state pressure and flow fields are solved for a two-dimensional, interconnected network of fractures with no-flow outer boundaries and constant-pressure source and sink points to simulate wellbore-fracture intersections. The tracer response is...
متن کاملInvestigation of Salt Precipitation in Geothermal Reservoir near Sealing Conditions
The main goal of the work is to investigate the behavior of a geothermal reservoir containing salty water when its physical parameters exceed the critical values, i.e. when the vaporization process cannot be described by the asymptotic self-similarity solution. We consider a low-permeability rock, where salty water vaporizes at a sharp front, because of fluid extraction at constant pressure. If...
متن کاملReview of Deliverability Models Used in Geothermal Reservoir Simulations
Production wells on deliverability are often used in modelling geothermal fields, especially for simulations of future scenarios. The mass flow rate is calculated by multiplying the productivity index by mobility and the difference between flowing bottom-hole pressure and the reservoir block pressure. Here three options are considered for calculating the bottom-hole pressure: (i) constant, (ii)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Geophysical Research Letters
سال: 2014
ISSN: 0094-8276
DOI: 10.1002/2013gl058514