Change in Wear Resistance of Iron Based High Carbon—High Chromium Hard Overlay by Heat Treatment
نویسندگان
چکیده
منابع مشابه
Evaluation of Microstructure and Wear Behavior of Iron-based Hard - facing Coatings on the Mo40 Steel
Mo40 low-alloy steels are mostly used to produce industrial components such as crane wheels which are exposed to abrasive wear. However, during working conditions, their wear resistance is reduced after a while due to its low hardness. With increasing abrasive wear, the dimensions of components decrease and they need to be repaired for surface modification. In this regard, hard overlay coatings...
متن کاملTHE EFFECT OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF Fe-34Cr-4.5C%WT HARDFACING ALLOY
Abstract: Hardfacing is one of the most useful and economical ways to increase the service life of components subjected to abrasive wear. Iron based hardfacing alloys have long been considered as candidate coatings for wear-resistant applications in industry. In the present work two layer of Fe-34Cr-4.5C%wt hardfacing alloy was deposited on ASTM A36 carbon steel plates by SMAW method. The m...
متن کاملEffect of Chromium Content on Microstructure and Wear Resistance of Fe-Cr-C Hard facing Layers
Layers of Fe-Cr-C Hard facing material containing various amounts of chromium were deposited on mild steel base metal. Optical Microscope (OM), Scanning Electron Microscope (SCM) and X-ray diffraction (XRD) were used to investigate the effect of chromium content of micro structural characteristics of Fe-Cr-C hard facing layers. The M7C3 carbide refinement mechanism exists on base metal. The exp...
متن کاملevaluation of microstructure and wear behavior of iron-based hard - facing coatings on the mo40 steel
mo40 low-alloy steels are mostly used to produce industrial components such as crane wheels whichare exposed to abrasive wear. however, during working conditions, their wear resistance is reduced aftera while due to its low hardness. with increasing abrasive wear, the dimensions of components decreaseand they need to be repaired for surface modification. in this regard, hard overlay coatings ar...
متن کاملTribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2010
ISSN: 0288-4771
DOI: 10.2207/qjjws.28.48