CH4Combustion Characteristics of Oxygen Carriers in a Bubbling Fluidized Bed
نویسندگان
چکیده
منابع مشابه
Fundamental Bubbling Characteristics in a Rotating Fluidized Bed: Modeling and Measurement of Bubble Size
Modeling and measurement of bubble size in a rotating fluidized bed (RFB) were conducted. The model for predicting the bubble growth in RFB has been proposed based on the following concepts: (i) local centrifugal acceleration and excess gas velocity are considered as the parameters in the radial direction, and (ii) bubble volume flow locally changes depending on the radial distance. Bubbling be...
متن کاملBubbling fluidized bed characterization using Electrical Capacitance Volume Tomography (ECVT)
Available online xxxx
متن کاملCFD simulation for segregation behavior of a ternary mixture in a bubbling fluidized bed: effect of solid wall boundary condition
Abstract The effect of the solid–wall boundary condition on the segregation behavior of a sand ternary mixture differing in size but having the same proportion has been investigated in a gas–solid bubbling fluidized bed. A multi-fluid computational fluid dynamics model incorporating the kinetic theory of granular flow has been used. The mass fraction profiles of the different-sized partic...
متن کاملA Pilot Study of Syngas Production from Bio-oil Thermal Cracking in a Bubbling Fluidized Bed Reactor
A fluidized bed reactor that is operating in the bubbling regime has been developed for the conversion of bio-oils to syngas.The reactor consists of a 7.6 cm I.D. (or internal diameter) bed, with an expanded freeboard. The volume of the reactor can be adjusted to vary the gas residence time. This reactor has been used to carry out either thermal or catalytic cracking for reforming bio-oils.A ga...
متن کاملEffect of Segregation on the Reaction Rate of Sewage Sludge Pyrolysis in a Bubbling Fluidized Bed
The evolution of the pyrolysis of sewage sludge in a fixed and a fluidized bed was analyzed using a novel measuring technique. This original measuring technique consists of installing the whole reactor over a precision scale, capable of measuring the mass of the complete reactor with enough precision to detect the mass released by the sewage sludge sample during its pyrolysis. The inert conditi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Korean hydrogen and new energy society
سال: 2016
ISSN: 1738-7264
DOI: 10.7316/khnes.2016.27.5.581