CFRP-Recycling Following a Pyrolysis Route: Process Optimization and Potentials
نویسندگان
چکیده
منابع مشابه
Recycling of polymers by pyrolysis
The pyrolysis of plastic waste, scrap tires and other polymeric materials in a fluidized bed has been carried out based on a scale up program (laboratory plants 70 g/h, 500 g/h, 3000 g/h, and pilot plant 20-50 kg/h). The fluidized bed shows short residence times and high heat and mass transfers, and is heated indirectly up to 600 800 OC. In the case of poly(methylmethacry1ate) (PMMA) or polysty...
متن کاملOptimization of Vacuum Pyrolysis Process Using Generalized Regression Neural Network
A new empirical technique to construct predictive models of vacuum pyrolysis process is presented in this study. Pyrolysis of biomass for preparing bio-oil was studied on a vacuum pyrolysis system, where rape straw was chosen as the raw material. The experiments ran based on orthogonal experimental design method. The operation factors of the system including pyrolysis temperature, system pressu...
متن کاملRecycling process of spent bleaching clay: Optimization by response surface methodology
Oil refining is an inevitable step in production of edible and industrial oil. Bleaching is the most important process among the refining processes. Bleaching adsorption is the most common method and clay is the most widely used adsorbent in this method. Disposal of bleaching clay, as a waste from re-refining plants, makes many environmental problems and economic losses. In the current study, t...
متن کاملPossibilities and limits of pyrolysis for recycling plastic rich waste streams rejected from phones recycling plants.
The possibilities and limits of pyrolysis as a means of recycling plastic rich fractions derived from discarded phones have been studied. Two plastic rich samples (⩾80wt% plastics) derived from landline and mobile phones provided by a Spanish recycling company, have been pyrolysed under N2 in a 3.5dm3 reactor at 500°C for 30min. The landline and mobile phones yielded 58 and 54.5wt% liquids, 16....
متن کاملRecovering Carbon Fibers
S ince 2000, the worldwide market for carbon-fiber-reinforced composite materials (CFRP) has grown from 30,500 to 43,500 tons per year. According to the latest estimates, the demand for carbon fibers will rise to some 1,300,000 tons by 2020 [1]. When preforms are used for manufacturing CFRP parts by the Liquid Composite Molding (LCM) process, up to 40 % waste accrues, resulting in a considerabl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Composite Materials
سال: 2009
ISSN: 0021-9983,1530-793X
DOI: 10.1177/0021998308097737