CFD simulations of polymer devolatilization in steam contactors
نویسندگان
چکیده
منابع مشابه
CFD simulations of steam cracking furnaces using detailed combustion mechanisms
A three-dimensional mathematical model has been developed for the simulation of flow, temperature and concentration fields in the radiation section of industrial scale steam cracking units. The model takes into account turbulence–chemistry interactions through the Eddy Dissipation Concept (EDC) model and makes use of Detailed Reaction Kinetics (DRK), which allows the detailed investigation of t...
متن کاملCFD Simulations of Pressure Drop in KATAPAK-S Structured Packing
KATAPAK-S is a type of structured catalytic packing, which is used in reactive distillation processes. The dry pressure drop characteristic (the pressure drop in the absence of liquid flow) is of significant importance for the investigation of process hydrodynamics. In this paper, the dry pressure drop within the catalyst packed channels of KATAPAK-S has been investigated using Computational Fl...
متن کاملCalibration of CFD Model for Mist/Steam Impinging Jets Cooling
In the heavy-frame advanced turbine systems, steam is used as a coolant for turbine blade cooling. The concept of injecting mist into the impinging jets of steam was experimentally proved as an effective way of significantly enhancing the cooling effectiveness in the laboratory under low pressure and temperature conditions. However, whether mist/steam cooling is applicable under actual gas turb...
متن کاملCFD-simulation of membrane reactor for methane steam reforming
A membrane reactor is a reaction system that provides higher productivity and lower separation cost in chemical reaction processes. In this paper, packed bed catalytic membrane reactor with palladium membrane for methane steam reforming was analyzed both experimentally and numerically. The numerical model consists of a full set of partial differential equations derived from conservation of mass...
متن کاملCFD modeling and control of a steam methane reforming reactor
This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Applications of Computational Fluid Mechanics
سال: 2017
ISSN: 1994-2060,1997-003X
DOI: 10.1080/19942060.2017.1283647