CFD Modeling to Analyze Palm Shell Co-firing Percentage on Ketapang CFB Power Plant
نویسندگان
چکیده
Abstract Biomass is one of the world’s greatest sustainable energy potentials. Utilization biomass in form Co-firing coal fuel with alternative to reduce dependence fossil fuels towards green power plant. This paper addresses Co-Firing modelling test results up 50% using palm kernel shell (palm shell) Ketapang Coal Fired Power Plant (CFPP) 2x10 MW. CFPP has circulating fluidized bed (CFB) boiler. There are several advantages by direct co-firing CFB boiler: lowest investment cost, a wider range selection characteristics and than PC Boilers, can process materials higher moisture content, etc. Result shown that optimum percentage use 30% shell. caused temperature value at 18 cm above furnace exit gas which not too much different from 0% also strengthened high CO 2 mass fraction mixture, indicates an ideal combustion.
منابع مشابه
Computational Fluid Dynamic Analysis of Co-Firing of Palm Kernel Shell and Coal
The increasing global demand for palm oil and its products has led to a significant growth in palm plantations and palm oil production. Unfortunately, these bring serious environmental problems, largely because of the large amounts of waste material produced, including palm kernel shell (PKS). In this study, we used computational fluid dynamics (CFD) to investigate the PKS co-firing of a 300 MW...
متن کاملCFB reactors , CFD and particle / turbulence interactions
The design of furnaces and boilers for solid fuels is supported increasingly by powerful softwares and ever faster computers. A round-robin over the most important CFD (computational fluid mechanics) models and softwares currently available shows, however, that numerical procedures for particle/turbulence interactions are not (yet) very advanced. Particle/fluid interphase slip is considered, bu...
متن کاملHydraulic Network Modeling to Analyze Stream Flow Effectiveness on Heat Transfer Performance of Shell and Tube Heat Exchangers
In this article, stream flow effectivness is based on hydraulic network studied in the shell-side of a shell and tube heat exchange as a case study. For an appropriate heat exchangers rating design to meet a specified duty, it's better to consider each stream flow separately. Using the hydraulic network principals, a set of the correlations for calculating different stream flow rates in the cro...
متن کاملInvestigating Different Methods of Closed Shell Pistachios Splitting and Effects of Freezing Prior to Drying on Shell Splitting Percentage
In this study, different methods for shell splitting and the effect of freezing prior to drying on shell splitting percentage of pistachio were investigated. A completely randomized design was used to investigate the effects of different freezing temperatures (0, -6, -12 and -18°C), different drying temperatures (80, 90 and 100°C) and different cultivars (Akbari and Kalehghouchi) on shell split...
متن کاملFlapping Wing CFD/CSD Aeroelastic Formulation Based on a Co-rotational Shell Finite Element
Flexible flapping wings have garnered a large amount of attention within the micro aerial vehicle (MAV) community: a critical component of MAV flight is the coupling of aerodynamics and structural dynamics. This paper presents a computational framework for simulating shell-like wing structures flapping in incompressible flow at low Reynolds numbers in both hover and forward flight. The framewor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: ['1757-8981', '1757-899X']
DOI: https://doi.org/10.1088/1757-899x/1096/1/012131