CFD Modeling of Combustion in Biomass Furnace
نویسندگان
چکیده
منابع مشابه
CFD Modeling of Grate Furnace Designs for Municipal Solid Waste Combustion
The average amount of municipal solid waste (MSW) generated in Malaysia is 0.5–0.8 kg/person/day and has increased to 1.7 kg/person/day in major cities. As rapid development continues, so does the amount of MSW and thus a lack of space for new landfills. Thus a better way of disposing MSW would be to incinerate. The basic design requirements of high-performance incinerators are the 3Ts (time, t...
متن کاملDevelopment of reduced mechanisms applicable to CFD modeling of NOx emissions from biomass combustion
i Preface The report deals with development of reduced kinetic mechanisms for ammonia oxidation that can be used for CFD modeling of NO x formation in biomass combustors. A computer code CARM was tested for generation of the reduced mechanisms. Berkeley. We want to thank him for supplying us with the code, as well as helping us to get started. The report firstly describes shortly the general me...
متن کاملKinetic Modeling of Biomass Gasification and Combustion
This review critically examines char conversion kinetics in oxidizing or reducing atmosphere. In kinetic analysis the devolatilization of biomass and the conversion of char are usually investigated by means of separate experiments, although some kinetic models are also available of biomass combustion. The large majority of the char conversion kinetics consists of a global reaction with activati...
متن کاملNumerical modeling of biomass combustion in a stoker boiler
Biomass fuel is considered a promising substitute for traditional fossil fuels. Amid a great variety of methods for converting the energy in biomass fuel into usable energy, direct combustion is still the dominant technology employed by industry. Because biomass fuel possess a much wider range of physical and chemical properties than fossil fuel, its combustion behavior is similarly diverse (an...
متن کامل3rd Oxyfuel Combustion Conference IMPACT OF CO2 ON BIOMASS DEVOLATILISATION, NITROGEN PARTITIONING AND CHAR COMBUSTION; A DROP TUBE FURNACE ANALYSIS
Biomass oxy-combustion is attracting considerable attention in recent times because it can achieve negative CO2 emission. While different fundamental issues of oxy-coal combustion are being tackled and pilot demonstrations have been conducted at various scales, little is known about the behaviour of biomass under oxy-fuel combustion. This paper investigates and presents the results of the devol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2017
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2017.07.179