CFD Analysis of Torque and Power for Single Rotor, Dual Rotor, and Ducted Dual Rotor Wind Turbine
نویسندگان
چکیده
With the present advancement, a wind turbine needs rotor with high torque and power. The study aims to enhance power of by employing ducted dual rotor. In this regard, CFD analysis is performed analyze produced for horizontal axis single bare turbine, convergent-divergent type turbine. comparative conducted aforementioned type. results highlight maximum value 36.9% more than at 16 m/s velocity 92.2 % velocity, 40.48% 139.66% velocity. Therefore result suggested that better
منابع مشابه
A Novel Dual-Rotor Turbine for Increased Wind Energy Capture
Horizontal axis wind turbines suffer from aerodynamic inefficiencies in the blade root region (near the hub) due to several non-aerodynamic constraints. Aerodynamic interactions between turbines in a wind farm also lead to significant loss of wind farm efficiency. A new dual-rotor wind turbine (DRWT) concept is proposed that aims at mitigating these two losses. A DRWT is designed that uses an e...
متن کاملNumerical aeroelastic analysis of wind turbine NREL Phase VI Rotor
This study investigated the performance and aeroelastic characteristics of a wind turbine blade based on strongly coupled approach (two-way fluid structure interaction) to simulate the transient FSI[1] responses of HAWT[2]. Aerodynamic response was obtained by 3D CFD-URANS approach and structural response was obtained by 3D Finite element method. ...
متن کاملNumerical aeroelastic analysis of wind turbine NREL Phase VI Rotor
This study investigated the performance and aeroelastic characteristics of a wind turbine blade based on strongly coupled approach (two-way fluid structure interaction) to simulate the transient FSI1 responses of HAWT2. Aerodynamic response was obtained by 3D CFD-URANS approach and structural response was obtained by 3D Finite element method. Aeroelastic responses of the blade were obtained by ...
متن کاملDouble Layer Magnet Design Technique for Cogging Torque Reduction of Dual Rotor Single Stator Axial Flux Brushless DC Motor
Cogging torque is the major limitation of axial flux permanent magnet motors. The reduction of cogging torque during the design process is highly desirable to enhance the overall performance of axial flux permanent magnet motors. This paper presents a double-layer magnet design technique for cogging torque reduction of axial flux permanent magnet motor. Initially, 250 W, 150 rpm axial flux brus...
متن کاملnumerical aeroelastic analysis of wind turbine nrel phase vi rotor
this study investigated the performance and aeroelastic characteristics of a wind turbine blade based on strongly coupled approach (two-way fluid structure interaction) to simulate the transient fsi1 responses of hawt2. aerodynamic response was obtained by 3d cfd-urans approach and structural response was obtained by 3d finite element method. aeroelastic responses of the blade were obtained by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of engineering and advanced technology
سال: 2021
ISSN: ['2249-8958']
DOI: https://doi.org/10.35940/ijeat.d2500.0410421