Ceramic planar waveguide laser of non-aqueous tape casting fabricated YAG/Yb:YAG/YAG
نویسندگان
چکیده
منابع مشابه
Ceramic planar waveguide laser of non-aqueous tape casting fabricated YAG/Yb:YAG/YAG
Ceramic YAG/Yb:YAG/YAG planar waveguide lasers were realized on continuous-wave and mode-locked operations. The straight waveguide, fabricated by non-aqueous tape casting and solid state reactive sintering, enabled highly efficient diode-pumped waveguide continuous-wave laser with the slope efficiency of 66% and average output power of more than 3 W. The influence of the waveguide structure on ...
متن کاملTAPE CASTING OF NON-AQUEOUS HYDROXYAPATITE SLIPS
Thin sheets of hydroxyapatite were fabricated by tape casting process. The non-aqueoustape casting formulation was optimized by adjusting the concentration of organic additivesspecially those of binder and plasticizer in the slurry. The optimized slurry was cast on a glasscarrier using a designed laboratory scale doctor blade. Following a binder removal stage, thetapes were sintered at differen...
متن کاملAn 11.5 W Yb:YAG planar waveguide laser fabricated via pulsed laser deposition
We present details of the homo-epitaxial growth of Yb:YAG onto a <100> oriented YAG substrate by pulsed laser deposition. Material characterization and initial laser experiments are also reported, including the demonstration of laser action from the 15 μm-thick planar waveguide generating 11.5 W of output power with a slope efficiency of 48%. This work indicates that under appropriate condition...
متن کاملLaser operation of a Tm:Y2O3 planar waveguide.
We demonstrate the first Tm-doped yttria planar waveguide laser to our knowledge, grown by pulsed laser deposition. A maximum output power of 35 mW at 1.95 μm with 9% slope efficiency was achieved from a 12 μm-thick film grown on a Y(3)Al(5)O(12) substrate.
متن کاملEnhanced Performance of La0.6Sr0.4Co0.2Fe0.8O3−δδ (LSCF) Cathodes with Graded Microstructure Fabricated by Tape Casting
La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) powders with different particle sizes, synthesized through a citrate complexation method and a gel-casting technique, are used to fabricate porous LSCF cathodes with graded microstructures via tape casting. To create porous electrodes with desired porosity and pore structures, graphite and starch are used as pore former for different layers of the graded cathode....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2016
ISSN: 2045-2322
DOI: 10.1038/srep31289