Centrifugal SHS metallurgy of nickel aluminide-based eutectic alloys
نویسندگان
چکیده
منابع مشابه
The Effects of Beryllium Additions on the Oxidation of Nickel Aluminide and Titanium Aluminide Based Intermetallics
The effects of Be additions on the oxidation behavior of ~-NiAl in moist air at 1000°C and borderline alumina-forming y (TiAI) + Laves Ti-Al-Cr based alloys at 800°C and 1000°C in dry and moist air were investigated. The addition of Be to ~-NiAl suppressed the formation of transient alumina, and resulted in the formation of a protective BeAl20 4 spinel phase. In dry air, the addition of Be to t...
متن کاملPhysical metallurgy of nickel aluminides
A description of the important physical metallurgy aspects of Ni3Al and NiAl encompassing structure, crystallographic defects, slip systems and phase stability has been presented in this article. The microstructures generated in the two alloys by conventional as well as novel processing techniques have been discussed. The effect of alloying additions on the microstructure has been enumerated. B...
متن کاملVacancy Mobility in Nickel Aluminide versus Composition
The fractional concentration of Ni-vacancies in NiAl at high temperature has been determined for compositions between 50 and 53 at.% Ni from measurements using perturbed angular correlation of gamma rays (PAC). The vacancies were detected by quadrupole interactions induced at nearby In/Cd impurity probes present on the Al sublattice in high dilution. One set of measurements was made at high tem...
متن کاملEquilibrium Defects and Concentrations in Nickel Aluminide
Perturbed angular correlation of gamma rays was applied to determine properties of equilibrium defects in B2 NiAl near the stoichiometric composition. Point defects were detected through quadrupole interactions they induce at In probe atoms on the Al sublattice. Well-resolved signals were observed for probe atoms having zero, one or two Ni-vacancies (VNi) in the first neighbor shell. The fracti...
متن کاملFormation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy
Practical applications of thermal barrier coatings with aluminide bond-coats are limited due to oxide scale spallation of the aluminide coating under applied thermal stresses. Considering the positive effects of oxygen-active elements or their oxides on the high temperature oxidation behavior, in this research zirconia was introduced into an aluminide coating. For this purpose, a Watts type bat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Russian Journal of Non-Ferrous Metals
سال: 2014
ISSN: 1067-8212,1934-970X
DOI: 10.3103/s1067821214060212