Centrifugal Compressor Design for a Gasoline Engine Turbocharger
نویسندگان
چکیده
منابع مشابه
Turbocharger Matching Method for Reducing Residual Concentration in a Turbocharged Gasoline Engine
In a turbocharged engine, preserving the maximum amount of exhaust pulse energy for turbine operation will result in improved low end torque and engine transient response. However, the exhaust flow entering the turbine is highly unsteady, and the presence of the turbine as a restriction in the exhaust flow results in a higher pressure at the cylinder exhaust ports and consequently poor scavengi...
متن کاملImproved Performance Prediction Model for Turbocharger Compressor
In order to improve centrifugal compressor performance predictive capability, an improved recirculation loss model in two-zone modeling system is presented in this paper. The new loss model correlates Reynolds number of the impeller with the recirculation loss. Performance prediction by the improved model is carried out on two turbochargers with different sizes based on COMPAL mode of the code ...
متن کاملconceptual design of a centrifugal compressor impeller for a 65 kw micro gas turbine
the aim of this study is designing the impeller of a centrifugal compressor in order to supply pressure ratio for a 65 kw micro gas turbine. first, the primary thermodynamic analysis has been conducted for the considered cycle using a home made code. herein, the compressor pressure ratio was considered to be 4. the obtained thermal efficiency was 25.64%. then, the design of micro compressor in ...
متن کاملDesign, Analysis and Fabrication of a Meso-scale Centrifugal Compressor
A gas or vapor compressor is one of the key components of many engineering systems, such as certain designs of vapor compression refrigeration systems, cryo-coolers, air handlers. For meso-scale systems with linear dimensions of a few centimeters, conventional designs do not work efficiently because of rather large relative tolerances, and hence these meso-scale systems require micro-fabricated...
متن کاملOptimal Design of a Centrifugal Compressor Impeller Using Evolutionary Algorithms
An optimization study was conducted on a centrifugal compressor. Eight design variables were chosen from the control points for the Bezier curves which widely influenced the geometric variation; four design variables were selected to optimize the flow passage between the hub and the shroud, and other four design variables were used to improve the performance of the impeller blade. As an optimiz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Fluid Mechanics & Thermal Sciences
سال: 2020
ISSN: 2469-8105
DOI: 10.11648/j.ijfmts.20200601.14