Centrifugal Casting of Ni-Al Intermetallic Compounds Produced by Thermite-Type Combustion Synthesis
نویسندگان
چکیده
منابع مشابه
NUMERICAL SIMULATION OF COMBUSTION SYNTHESIS OF ALUMINIDE INTERMETALLIC COMPOUNDS
Combustion synthesis is a special thermophysico-chemical process applied for production of intermetallic compounds. In the present work, a reaction–diffusion numerical model was developed to analyze the combustion synthesis of aluminide intermetallics by self-propagating high-temperature synthesis process. In order to verify the reliability of the numerical model, an experimental setup was desi...
متن کاملOptimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
Semi-Solid Casting (SSM) is a new process that could produce globular structures with mechanical properties. The cooling slope method (CLM) is a one of this process that was employed to produce the A360 feedstock. In this method, The dendritic primary phase in the conventionally cast A356 alloy has transformed into a non-dendritic one. In this paper, The molten alloy with the temperature (PT) o...
متن کاملintermetallic phase formation during combustion synthesis of mechanically activated ni-ti alloy
intermetallic phase formation and oxidation reaction during combustion synthesis (cs) of ni-ti equiatomic mixture are affected by mechanical activation (ma) and pre-heating conditions. important parameters are ignition time, reaction duration, temperature rise, microstructural change, titanium oxidation and intermetallic phase formation. superelasticity and shape memory effects are influenced b...
متن کاملHydrogen storage properties of Ml, _,Ca,Ni, pseudobinary intermetallic compounds
The hydrogen storage properties of the pseudobinary intermetallic compounds Ml, -.Ca,Ni, (where Ml is La-rich mischmetal and x varies from 0 to 0.9) were investigated over the temperature range of 25-80°C It was found in experiment that with increasing x in Ml,_,Ca,Ni, the incubation time for its first hydrogenation shortened, the first hydrogen absorption rate accelerated, the hysteresis lower...
متن کاملThe Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting
The aim of this work was WC distribution in base Al-Si-Mg (A356) alloy as reinforcing agent. WC Solid particles in the sub-23-nm size range added to melted alloy by centrifuge casting. The cylinder tube without gap was obtained. FESEM and OPM results show that the distribution depends upon the rotational speeds of the mould and centrifugal casting conditions. According to the MAP results, durin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2001
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.65.5_458