Cementitious Behavior of Argon Oxygen Decarburization Stainless Steel Slag and Its Stabilization on Chromium
نویسندگان
چکیده
منابع مشابه
Growth Defects and Chromium Content Loss during the Deposition of Stainless Steel by CAE-PVD and Its Effect on the Corrosion and Passivation Behavior of the Coating
In the present study, the effects of growth defects and chromium content loss on the degradation of corrosion and passivation of cathodic arc evaporation (CAE-PVD) of stainless steel coating were investigated in 2 M sulphuric acid solution. EDS analysis indicated that the micro-particles were obtained during the coating growth. In addition, it was detected that the growth defects had poor adhes...
متن کاملEffects of Temperature and Oxygen Concentration on the Characteristics of Decarburization of 55SiCr Spring Steel
Effects of temperature and oxygen concentration on decarburization of 55SiCr spring steel were investigated at the temperature range of 500°C–1 200°C by using a Muffle furnace (an atmosphere of ambient air) and a Simultaneous Thermal Analyzer (low oxygen concentration with 2% O2 and 98% N2). In ambient air, the decarburization behavior can be divided roughly into five temperature ranges: T≥1 20...
متن کاملFinite-Element Thermal Analysis and Grain Growth Behavior of HAZ on Argon Tungsten-Arc Welding of 443 Stainless Steel
This paper presents a numerical and infrared experimental study of thermal and grain growth behavior during argon tungsten arc welding of 443 stainless steel. A 3D finite element model was proposed to simulate the welding process. The simulations were carried out via the Ansys Parametric Design Language (APDL) available in the finite-element code, ANSYS. To validate the simulation accuracy, a s...
متن کاملMultilayer perceptron to model the decarburization process in stainless steel production
The Argon-Oxygen Decarburization (AOD) is the refining process of stainless steel to get its final chemical composition through several stages, where tons of materials are added and oxygen and inert gas are blown. The decarburization efficiency and the final temperature in each stage are two important values of this process. We present in this paper an empirical model, based on Multilayer Perce...
متن کاملCorrosion Behavior of Stainless Steel Clad Rebar
Stainless steel clad rebar (SCR) was investigated because it may become a cost-effective means of controlling corrosion in concrete under very aggressive environments. Sound SCR (316L cladding) resisted corrosion in saturated Ca(OH)2 solution (SCS) with up to 5 wt% chloride. Cladding breaks on SCR induced significant corrosion of exposed underlying CS in SCS with only 1 wt% chloride. A computer...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Crystals
سال: 2020
ISSN: 2073-4352
DOI: 10.3390/cryst10100876